LT1030CN集成电路（IC）的驱动器接收器收发器规格书PDF中文资料

LT1030CN属于集成电路（IC）的驱动器接收器收发器。由德州仪器制造生产的LT1030CN驱动器，接收器，收发器该系列产品的主要功能是提供必需的硬件资源，以通过延长电缆或印制线进行通信。确切的功能会因所采用的通信协议而异，可能包括诸如瞬态抑制之类的功能，这些功能对于通信用途可能并非绝对必要，但对于可能的使用环境却是明智之选。

Low Supply Voltage . . . ±5 V to ±15 V

Supply Current . . . 500 mA Typical

Zero Supply Current When Shut Down

Outputs Can Be Driven ±30 V

Output Open When Off (3-State)

10-mA Output Drive

Outputs of Several Devices Can Be

Connected in Parallel

Meets or Exceeds the Requirements of

ANSI EIA/TIA-232-F Specifications

Designed to Be Interchangeable With

Linear Technology LT1030

description

The LT1030C is an EIA/TIA-232-F line driver that operates over a ±5-V to ±15-V supply-voltage range on low

supply current. The device can be shut down to zero supply current. Current limiting fully protects the outputs

from externally applied voltages of ±30 V. Since the output swings to within 200 mV of the positive supply and

to within 1 V of the negative supply, supply-voltage requirements are minimized.

A major advantage of the LT1030C is the high-impedance output state when the device is off or powered down.

This feature allows several different drivers on the same bus.

The device can be used as an EIA/TIA-232-F driver, micropower interface, or level translator, among others.

The LT1030C is characterized for operation from 0°C to 70°C.