LT1030中文资料四路低功耗线路驱动器数据手册TI规格书

描述 Description

The LT1030C is an EIA/TIA-232-F line driver that operates over a ±5-V to ±15-V supply-voltage range on low supply current. The device can be shut down to zero supply current. Current limiting fully protects the outputs from externally applied voltages of ±30 V. Since the output swings to within 200 mV of the positive supply and to within 1 V of the negative supply, supply-voltage requirements are minimized. A major advantage of the LT1030C is the high-impedance output state when the device is off or powered down. This feature allows several different drivers on the same bus. The device can be used as an EIA/TIA-232-F driver, micropower interface, or level translator, among others. The LT1030C is characterized for operation from 0°C to 70°C. The D package is available taped and reeled. Add the suffix R to the device type (i.e., LT1030CDR).

特性 Features

• Low Supply Voltage...±5 V to ±15 V
• Supply Current...500 uA Typical
• Zero Supply Current When Shut Down
• Outputs Can Be Driven ±30 V
• Output Open When Off (3-State)
• 10-mA Output Drive
• Outputs of Several Devices Can Be Connected in Parallel
• Meets or Exceeds the Requirements of ANSI EIA/TIA-232-F Specifications
• Designed to Be Interchangeable With Linear Technology LT1030

简介

LT1030属于集成电路（IC）的驱动器接收器收发器。由TI制造生产的LT1030驱动器，接收器，收发器该系列产品的主要功能是提供必需的硬件资源，以通过延长电缆或印制线进行通信。确切的功能会因所采用的通信协议而异，可能包括诸如瞬态抑制之类的功能，这些功能对于通信用途可能并非绝对必要，但对于可能的使用环境却是明智之选。