LT1009CLP集成电路（IC）的电压基准规格书PDF中文资料

LT1009CLP属于集成电路（IC）的电压基准。由德州仪器制造生产的LT1009CLP电压基准产品属于基准电压源系列，可通过相对较不稳定的电源提供稳定的电势，电压值始终保持恒定，以便在测量、控制和类似应用中用作比较的标准。其功能行为可能与用于大功率调节的线性稳压器相似，但基准电压源器件却不适合用于此类用途。用作比较标准时，若输出电流容量或实际负载电流增大，其性能通常会降低。

1FEATURES

· Excellent Temperature Stability

· Initial Tolerance: 0.2% Max

· Dynamic Impedance: 0.6 Ω Max

· Wide Operating Current Range

· Directly Interchangeable With LM136

· Needs No Adjustment for Minimum

Temperature Coefficient

DESCRIPTION/ORDERING INFORMATION

ANODE CATHODE

ADJ

LT1009

www.ti.com................................................................................................................................................................. SLVS013N–MAY 1987–REVISED MAY 2009

2.5-V INTEGRATED REFERENCE CIRCUIT

· Excellent Temperature Stability · Wide Operating Current Range

· Initial Tolerance: 0.2% Max · Directly Interchangeable With LM136

· Dynamic Impedance: 0.6 Ω Max · Needs No Adjustment for Minimum

Temperature Coefficient

The LT1009 reference circuit is a precision-trimmed 2.5-V shunt regulator featuring low dynamic impedance and

a wide operating current range. The maximum initial tolerance is ±5 mV in the LP package and ±10 mV in the D

and PW packages. The reference tolerance is achieved by on-chip trimming, which minimizes the initial voltage

tolerance and the temperature coefficient, aVZ.

Although the LT1009 needs no adjustments, a third terminal (ADJ) allows the reference voltage to be adjusted

±5% to eliminate system errors. In many applications, the LT1009 can be used as a terminal-for-terminal

replacement for the LM136-2.5, which eliminates the external trim network.

The LT1009 uses include 5-V system references, 8-bit analog-to-digital converter (ADC) and digital-to-analog

converter (DAC) references, and power-supply monitors. The device also can be used in applications such as

digital voltmeters and current-loop measurement and control systems.

The LT1009C is characterized for operation from 0°C to 70°C. The LT1009I is characterized for operation from

–40°C to 85°C.