LPM12传感器变送器的配件规格书PDF中文资料

LPM12属于传感器变送器的配件。由力特公司制造生产的LPM12配件与此类别中其他器件一起使用的辅助产品。

描述 Description

The LCS10T12 connected to the LPM12 or LPMG12 indicator

is a low cost, easy to use, go/no-go indication system for the

remote monitoring of current flow. The LCS10T12 is installed

on an adequately insulated wire of the monitored load. Its 12in.

(30.4cm) leads are connected to the LPM12 or LPMG12 panel

mount indicator directly or via customer supplied wires up to 500

feet (152.4m) long.

Operation

When the monitored current is 5A turns, the panel mount LPM

indicator will glow. The LCS10T12 is designed to maximize the

light output of the panel mount indicator. It can be used to

monitor current flow of less than 5A by passing the monitored

conductor 2 or more times through the sensor.

CAUTION: The LCS10T12 must be connected to the LPM12

or LPMG12 before current flows to prevent damage or a shock

hazard. Monitored wires must be properly insulated.

Panel mount indicator designed to match the output of the

LCS10T12. The LPM12 and LPMG12 come with 12 in. (30.4 cm)

wires and a one piece mounting clip. Both devices install quickly

in a 0.25 in. (6.35 mm) hole in panels from 0.031 - 0.062 in.

(0.79 - 1.6 mm) thick.

特性 Features

JJ Low cost go/no go indication

JJ May be connected to wires up to 500 feet (152.4 m) long

JJ Remote monitoring of currents up to 50A

JJ Green or red LED indicator available