NXP Microcontrollers Selection Guide

文件：4.35555 Mbytes 页数：12 Pages

恩XP

32-bit ARM Cortex-M0 microcontroller; up to 32 kB flash; up to 10 kB SRAM and 4 kB EEPROM; USART

文件：1.30732 Mbytes 页数：62 Pages

恩XP

32-bit ARM Cortex-M0 microcontroller; up to 32 kB flash; up to 10 kB SRAM and 4 kB EEPROM; USART

文件：1.30732 Mbytes 页数：62 Pages

恩XP

32-bit ARM Cortex-M0 microcontroller; up to 32 kB flash; up to 10 kB SRAM and 4 kB EEPROM; USART

文件：1.30732 Mbytes 页数：62 Pages

恩XP

32-bit ARM Cortex-M0 microcontroller; up to 32 kB flash; up to 10 kB SRAM and 4 kB EEPROM; USART

文件：1.30732 Mbytes 页数：62 Pages

恩XP

32-bit ARM Cortex-M0 microcontroller; up to 32 kB flash; up to 10 kB SRAM and 4 kB EEPROM; USART

文件：1.30732 Mbytes 页数：62 Pages

恩XP

32-bit ARM Cortex-M0 microcontroller; up to 32 kB flash; up to 10 kB SRAM and 4 kB EEPROM; USART

文件：1.30732 Mbytes 页数：62 Pages

恩XP

32kB闪存、10kB SRAM、LQFP48封装

The LPC11Exx MCU Family is an Arm® Cortex®-M0+ and Cortex-M0 based- low-cost32-bit MCU family operating at CPU frequencies of up to 50 MHz. The LPC11Exx MCU family is designed for 8/16-bitmicro-controller operations, offering performance, low power, simple instruction set reduce code size compared t System• Cortex-M0 or Cortex-M0+ processor, running at frequencies of up to 50 MHz\n• Serial wire debug (SWD) and JTAG boundary scan modes supported\n• System tick timer\n;

恩XP

基于ARM® Cortex®-M0+/M0内核的可扩展的入门级32位微控制器(MCU)

The LPC11Exx MCU Family is an Arm® Cortex®-M0+ and Cortex-M0 based- low-cost32-bit MCU family operating at CPU frequencies of up to 50 MHz. The LPC11Exx MCU family is designed for 8/16-bitmicro-controller operations, offering performance, low power, simple instruction set reduce code size compared t System• Cortex-M0 or Cortex-M0+ processor, running at frequencies of up to 50 MHz\n• Serial wire debug (SWD) and JTAG boundary scan modes supported\n• System tick timer\n;

恩XP

32kB闪存、10kB SRAM、HVQFN32封装

The LPC11Exx MCU Family is an Arm® Cortex®-M0+ and Cortex-M0 based- low-cost32-bit MCU family operating at CPU frequencies of up to 50 MHz. The LPC11Exx MCU family is designed for 8/16-bitmicro-controller operations, offering performance, low power, simple instruction set reduce code size compared t System• Cortex-M0 or Cortex-M0+ processor, running at frequencies of up to 50 MHz\n• Serial wire debug (SWD) and JTAG boundary scan modes supported\n• System tick timer;

恩XP