LP8758A1E0YFFR集成电路（IC）的稳压器-DC-DC开关稳压器规格书PDF中文资料

LP8758A1E0YFFR属于集成电路（IC）的稳压器-DC-DC开关稳压器。由德州仪器制造生产的LP8758A1E0YFFR稳压器 - DC-DC 开关稳压器DC-DC 开关稳压器 PMIC（电源管理集成电路）产品族中的产品是元器件级设备，用于需要稳定 DC 输入电压和/或将其转换为不同幅度的输出电压的应用。这些器件与称为“控制器”PMIC 的类似产品的区别在于集成了主开关元件，设备提供的电力会通过该元件。

1 Features

1• Fully Integrated Quad Buck, up to 4-A

Programmable Maximum Output Current Per

Buck

– Auto PWM-PFM and Forced-PWM Operations

– Programmable Output Voltage Slew Rate

From 30 mV/μs to 0.5 mV/μs

– Input Voltage Range: 2.5 V to 5.5 V

– VOUT Range: 0.5 V to 3.36 V with DVS

• Programmable Start-Up and Shutdown

Sequencing With Enable Signal

• I2C-Compatible Interface That Supports Standard

(100 kHz), Fast (400 kHz),

Fast+ (1 MHz), and High-Speed (3.4 MHz) Modes

• Interrupt Function with Programmable Masking

• Load Current Measurement

• Output Short-Circuit and Overload Protection

• Spread-Spectrum Mode for EMI Reduction

• The Four Buck Cores Operate 90° out of Phase

Thereby Reducing Input Ripple Current

• Overtemperature Warning and Protection

• Undervoltage Lockout (UVLO)

2 Applications

• Smart Phones, eBooks, and Tablets

• Network Processor Cards (NPCs), Wireless and

DSL Modems

• Solid State Drives

• Gaming Devices

3 Description

The LP8758-E0 device is designed to meet power

management requirements for low-power processors

in mobile phones, network cards, and similar

applications. The device contains four step-down DCDC

converter cores, providing four output voltage

rails. The device is controlled by an I2C-compatible

serial interface.

The automatic PWM-PFM (AUTO mode) operation

maximizes efficiency over a wide output-current

range.

The LP8758-E0 supports programmable start-up and

shutdown sequencing synchronized to hardware

Enable input signal.

The protection features include short-circuit

protection, current limits, input supply UVLO, and

temperature warning and shutdown functions.

Several error flags are provided for status information

of the device. In addition, the LP8758-E0 device

supports load current measurement without the

addition of external current sense resistors. During

start-up and voltage change, the device controls the

output slew rate to minimize output voltage overshoot

and the inrush current.