LP8552TLE/NOPB集成电路（IC）的LED驱动器规格书PDF中文资料

LP8552TLE/NOPB属于集成电路（IC）的LED驱动器。由德州仪器制造生产的LP8552TLE/NOPBLED 驱动器器件属于 LED 驱动器电源管理集成电路 (PMIC) 系列，可通过标称固定电压的电源为负载（通常为发光二极管）提供电流，并且电流可控。它与用于电压调节的类似产品的主要区别在于，这类器件提供较低的反馈电压（以提高系统能效），而且通常可对器件工作点进行外部控制，可在照明应用中用于实现调光功能。

1 Features

1• High-Voltage DC/DC Boost Converter with

Integrated FET with Four Switching Frequency

Options: 156/312/625/1250 kHz

• 2.7-V to 22-V Input Voltage Range to Support

1x…5x cell Li-Ion Batteries

• Programmable PWM Resolution

– 8 to 13 True Bit (Steady State)

– Additional 1 to 3 Bits Using Dithering During

Brightness Changes

• I2C-Compatible and PWM Brightness Control

• Automatic PWM & Current Dimming for Improved

Efficiency

• PWM Output Frequency and LED Current set

through Resistors

• Optional Synchronization to Display VSYNC Signal

• 6 LED Outputs with LED Fault (Short/Open)

Detection

• Low Input Voltage, Over-temperature, Overcurrent

Detection, and Shutdown

• Minimum Number of External Components

2 Applications

• Notebook and Netbook LCD Display LED

Backlight

• LED Lighting

3 Description

The LP8552 is a white LED driver with integrated

boost converter. It has six adjustable current sinks

which can be controlled by PWM input or with I2C- compatible serial interface. The boost converter has

adaptive output voltage control based on the LED

driver voltages. This feature minimizes the power

consumption by adjusting the voltage to lowest

sufficient level in all conditions.

LED outputs have 8-bit current resolution and up to

13-bit PWM resolution with additional 1-3 bit dithering

to achieve smooth and precise brightness control. Proprietary Phase Shift PWM control is used for LED

outputs to reduce peak current from the boost

converter, thus making the boost capacitors smaller.

The Phase Shifting scheme also eliminates audible

noise.

Automatic PWM dimming at lower brightness values

and current dimming at higher brightness values can

be used to improve the optical efficiency. Internal EEPROM is used for storing the configuration data.

This makes it possible to have minimum external

component count and make the solution very small.

The LP8552 has safety features which make it

possible to detect LED outputs with open or short

fault. As well low input voltage and boost overcurrent

conditions are monitored and chip is turned off in

case of these events. Thermal de-rating function

prevents overheating of the device by reducing

backlight brightness when set temperature has been

reached.