LP5860MRKPR集成电路（IC）的LED驱动器规格书PDF中文资料

LP5860MRKPR属于集成电路（IC）的LED驱动器。由德州仪器制造生产的LP5860MRKPRLED 驱动器器件属于 LED 驱动器电源管理集成电路 (PMIC) 系列，可通过标称固定电压的电源为负载（通常为发光二极管）提供电流，并且电流可控。它与用于电压调节的类似产品的主要区别在于，这类器件提供较低的反馈电压（以提高系统能效），而且通常可对器件工作点进行外部控制，可在照明应用中用于实现调光功能。

1 Features

• Operating voltage range:

– VCC/VLED range: 2.7 V to 5.5 V

– Logic pins compatible with 1.8 V, 3.3 V, and 5 V

• 18 high current and precision constant current

sinks:

– 125 mA per current sink when VCC ≥ 3.3 V

– Device-to-device error: ±5

– Channel-to-channel error: ±5

– Phase-shift for balanced transient power

• Ultra-low power consumption:

– Shutdown mode: ICC ≤ 2 uA when EN = Low

– Standby mode: ICC ≤ 10 uA when EN = High

and CHIP_EN = 0 (data retained)

– Active mode: ICC = 5 mA (typ.) when channel

current = 12.5 mA

• Flexible dimming options:

– Individual ON/OFF control for each LED dot

– Analog dimming (current gain control)

• Global 3-bit Maximum Current (MC) setting

for all LED dots

• 3 groups of 7-bit Color Current (CC) setting

for red, green, and blue

• Individual 8-bit Dot Current (DC) setting for

each LED dot

– PWM dimming with audible-noise-free

frequency

• Global 8-bit PWM dimming for all LED dots

• 3 programmable groups of 8-bit PWM

dimming for LED dot arbitrary mapping

• Individual 8-bit or 16-bit PWM dimming for

each LED dot

• Full addressable SRAM to minimize data traffic

• Individual LED dot open and short detection

• Deghosting and low brightness compensation

• Interface options:

– 1-MHz (max.) I2C interface when IFS = Low

– 12-MHz (max.) SPI interface when IFS = High

2 Applications

• LED animation and indication for:

– Major and smart home appliances

– Global RGB keyboard backlighting

– Outdoor keypad backlighting

– IR module for video surveillance and IP camera

– Laser diode in optical module

3 Description

The LP5861T is a high-current and high-performance

LED matrix driver. The device integrates 18 constant

current sinks with N (N = 6/8/11) switching MOSFETs

to support N × 18 LED dots or N × 6 RGB LEDs. The

LP5861T is the direct driving version to support 18

LED dots or 6 RGB LEDs.

The LP5861T supports both analog dimming and

PWM dimming methods. For analog dimming, each

LED dot can be adjusted with 256 steps. For PWM

dimming, the integrated 8-bit or 16-bit configurable

PWM generators enable smooth and audible-noisefree

dimming control. Each LED dot can also be

arbitrarily mapped into 8-bit Group PWM to achieve

dimming control together.

The LP5861T device implements full addressable

SRAM to minimize the data traffic. The ghostcancellation

circuitry is integrated to eliminate both

upside and downside ghosting. The LP5861T also

supports LED open and short detection functions.

Both 1-MHz (maximum) I2C and 12-MHz (maximum)

SPI are available in LP5861T.