LP3913中文资料面向基于闪存的便携式媒体播放器的电源管理 IC (PMIC)数据手册TI规格书

描述 Description

The LP3913 is a programmable system power management unit that is optimized for Flash Memory based Portable Media Players.
The LP3913 incorporates 2 low-dropout LDO voltage regulators, 3 integrated Buck DC/DC converters with Dynamic Voltage Scaling (DVS), a 4-channel 8-bit A/D converter, and a dual source Li-Ion/polymer battery charger. The charger has the capability to charge and maintain a single cell battery from a regulated wall adapter or USB power. When both USB and adapter sources are present, then the adapter source takes precedence and switching between USB and adapter power sources is seamless. In addition, the battery charger supports power routing, which allows system usage immediately after an external power source has been detected. The LP3913 also incorporates some advanced battery management functions such as battery temperature measurement, reverse current blocking for USB, LED charger status indication, thermally regulated internal power FETs, battery voltage monitoring, over-current protection and a 10–hour safety timer.
The 4-channel A/D converter measures the battery voltage and charge current, which can be used for fuel gauging. Two undedicated channels can be used to measure other analog parameters such as discharge current, battery temperature, keyboard resistor scanning and more.
The various IC parameters are programmable through a 400 kHz I2C compatible interface.
The LP3913 is available in a thermally-enhanced 6x6x0.8 mm 48 WQFN package and operates over an ambient temperature range of –40°C to +85°C.

特性 Features

·2 Low-Dropout Regulators -- LDO1 is Used for General Purpose Applications, LDO2 is Used for Low-Noise Analog Applications. Both LDOs Have Programmable Output Voltages.
·Green and Red LED Charger Status Drivers
·4-Channel 8-Bit Dual Slope A/D Converter
·3 High-Efficiency DVS Buck Converters
·400 kHz I2C Compatible Interface
·Linear Constant-Current/Constant-Voltage Charger for Single Cell Lithium-Ion Batteries
·USB and Adapter Charging
·System Power Supply Management
·6x6 x 0.8 mm 48 WQFN Package
·Voltage and Thermal Supervisory Circuits
·Continuous Battery Voltage Monitoring
·Interrupt Request Output with 8 Sources
·LP3913 is Pin for Pin and Software Compatible with the LP3910 Hard Drive Based PMIC
Key Specifications ·LDO1: 150 mA, 1.2V–3.3V
·LDO2: 150 mA, 1.3V–3.3V
·Buck1: 600 mA, 0.8V–2.0V
·Buck2: 600 mA, 1.8V–3.3V
·Buck3: 500 mA, 1.8V–3.3V
·50 mΩ Battery Path Resistance
·100 mA–1000 mA Full-Rate Charge Current Using Wall Adapter
·Selectable 0.05C and 0.1C EOC Current
·USB Current Limit of 100 mA, 500 mA, and 800 mA
·USB Pre-Qual Current of 50 mA
·Selectable 4.1V, 4.2V or 4.38V battery termination voltages
·0.35% Battery Termination Accuracy
·±1 LSB INL/DNL on 8-bit A/D Converter
All trademarks are the property of their respective owners.

简介

LP3913属于集成电路（IC）的电源管理-专用。由TI制造生产的LP3913电源管理 - 专用专用型电源管理集成电路 (PMIC) 用于电源的控制或操作，适合特定或小范围的目标应用，例如汽车气囊管理、电容器组平衡、AC 公共电力监控、存储器总线端接、接地故障检测、能量收集、小型引擎管理、处理器或芯片集专用电压调节、负载突降保护、触觉驱动器、热电制冷器控制等。