LP311PSR中文资料德州仪器数据手册PDF规格书

Low Power Drain . . . 900 μW Typical With

5-V Supply

Operates From ±15 V or From a Single

Supply as Low as 3 V

Output Drive Capability of 25 mA

Emitter Output Can Swing Below Negative

Supply

Response Time . . . 1.2 μs Typ

Low Input Currents:

Offset Current . . . 2 nA Typ

Bias Current . . . 15 nA Typ

Wide Common-Mode Input Range:

−14.5 V to 13.5 V Using ±15-V Supply

Offset Balancing and Strobe Capability

Same Pinout as LM211, LM311

Designed To Be Interchangeable With

Industry-Standard LP311

description/ordering information

The LP211 and LP311 devices are low-power versions of the industry-standard LM211 and LM311 devices.

They take advantage of stable, high-value, ion-implanted resistors to perform the same function as the LM311

series, with a 30:1 reduction in power consumption, but only a 6:1 slowdown in response time. They are well

suited for battery-powered applications and all other applications where fast response times are not needed.

They operate over a wide range of supply voltages, from ±18 V down to a single 3-V supply with less than 300-μA

current drain, but are still capable of driving a 25-mA load. The LP211 and LP311 are quite easy to apply free

of oscillation if ordinary precautions are taken to minimize stray coupling from the output to either input or to the

trim pins. In addition, offset balancing is available to minimize input offset voltage. Strobe capability also is

provided to turn off the output (regardless of the inputs) by pulling the strobe pin low.

The LP211 is characterized for operation from −25°C to 85°C. The LP311 is characterized for operation from

0°C to 70°C.