LMV797MMSLASHNOPB中文资料德州仪器数据手册PDF规格书

1FEATURES

2(Typical 5V Supply, Unless Otherwise Noted)

• Input Referred Voltage Noise 5.8 nV/√Hz

• Input Bias Current 100 fA

• Unity Gain Bandwidth 17 MHz

• Supply Current per Channel

– LMV796/LMV796Q 1.15 mA

– LMV797 1.30 mA

• Rail-to-Rail Output Swing

– @ 10 kΩ Load 25 mV from Rail

– @ 2 kΩ Load 45 mV from Rail

• Guaranteed 2.5V and 5.0V Performance

• Total Harmonic Distortion 0.01% @ 1kHz, 600Ω

• Temperature Range −40°C to 125°C

• LMV796Q is an Automotive Grade Product that

is AEC-Q100 Grade 1 Qualified and is

Manufactured on an Automotive Grade Flow.

APPLICATIONS

• Photodiode Amplifiers

• Active Filters and Buffers

• Low Noise Signal Processing

• Medical Instrumentation

• Sensor Interface Applications

• Automotive

DESCRIPTION

The LMV796/LMV796Q (Single) and the LMV797

(Dual) low noise, CMOS input operational amplifiers

offer a low input voltage noise density of 5.8 nV/√Hz

while consuming only 1.15 mA (LMV796/LMV796Q)

of quiescent current. The LMV796/LMV796Q and

LMV797 are unity gain stable op amps and have gain bandwidth of 17 MHz. The LMV796/LMV796Q/

LMV797 have a supply voltage range of 1.8V to 5.5V

and can operate from a single supply. The

LMV796/LMV796Q/LMV797 each feature a rail-to-rail

output stage capable of driving a 600Ω load and

sourcing as much as 60 mA of current.

The LMV796/LMV796Q family provides optimal

performance in low voltage and low noise systems. A

CMOS input stage, with typical input bias currents in

the range of a few femtoAmperes, and an input

common mode voltage range, which includes ground,

make the LMV796/LMV796Q and the LMV797 ideal

for low power sensor applications.

The LMV796/LMV796Q/LMV797 are manufactured

using TI’s advanced VIP50 process. The LMV796/ LMV796Q are offered in 5–pin SOT-23 package. The

LMV797 is offered in 8–pin VSSOP package.