LMV358AIDR.A中文资料德州仪器数据手册PDF规格书

1 Features

• Low input offset voltage: ±1mV

• Rail-to-rail output

• Unity-gain bandwidth: 1MHz

• Low broadband noise: 30nV/√ Hz

• Low input bias current: 10pA

• Low quiescent current: 70μA/Ch

• Unity-gain stable

• Internal RFI and EMI filter

• Operational at supply voltages as low as 2.5V

• Easier to stabilize with higher capacitive load due

to resistive open-loop output impedance

• Extended temperature range: –40°C to 125°C

2 Applications

• Smoke detectors

• Motion detectors

• Wearable devices

• Large and small appliances

• EPOS

• Barcode scanners

• Sensor signal conditioning

• Power modules

• Personal electronics

• Active filters

• HVAC: heating, ventilating, and air conditioning

• Motor control: AC induction

• Low-side current sensing

3 Description

The LMV3xxA family includes single (LMV321A),

dual (LMV358A), and quad-channel (LMV324A) lowvoltage

(2.5V to 5.5V) operational amplifiers (op

amps) with rail-to-rail output swing capabilities. These

op amps provide a cost-effective solution for spaceconstrained

applications such as large appliances,

smoke detectors, and personal electronics where lowvoltage

operation and high capacitive-load drive are

required. The capacitive-load drive of the LMV3xxA

family is 500pF, and the resistive open-loop output

impedance makes stabilization easier with much

higher capacitive loads. These op amps are designed

specifically for low-voltage operation (2.5V to 5.5V)

with performance specifications similar to the LMV3xx

devices.

The robust design of the LMV3xxA family simplifies

circuit design. The op amps feature unity-gain

stability, an integrated RFI and EMI rejection filter, and

no-phase reversal in overdrive conditions.

The LMV3xxA family is available in industry-standard

packages such as SOIC, MSOP, SOT-23, and TSSOP

packages.