LMH6654MAXSLASHNOPB.A中文资料德州仪器数据手册PDF规格书

1 Features

1• (VS = ±5 V, TJ = 25 °C, Typical Values Unless

Specified)

• Voltage Feedback Architecture

• Unity Gain Bandwidth 250 MHz

• Supply Voltage Range ±2.5V to ±6V

• Slew Rate 200 V/μsec

• Supply Current 4.5 mA/channel

• Input Common Mode Voltage −5.15V to +3.7V

• Output Voltage Swing (R L = 100 Ω) −3.6V to 3.4V

• Input Voltage Noise 4.5 nV/√Hz

• Input Current Noise 1.7 pA/√Hz

• Settling Time to 0.01% 25 ns

2 Applications

• ADC Drivers

• Consumer Video

• Active Filters

• Pulse Delay Circuits

• xDSL Receiver

• Pre-amps

3 Description

The LMH6654 and LMH6655 single and dual high

speed voltage feedback amplifiers are designed to

have unity-gain stable operation with a bandwidth of

250 MHz. They operate from ±2.5 V to ±6 V and each

channel consumes only 4.5 mA. The amplifiers

feature very low voltage noise and wide output swing

to maximize signal-to-noise ratio, and possess a true single supply capability with input common mode

voltage range extending 150 mV below negative rail

and within 1.3 V of the positive rail. The high speed

and low power combination of the LMH6654 and

LMH6655 make these products an ideal choice for

many portable, high speed applications where power

is at a premium.

The LMH6654 and LMH6655 are built on TI’s

Advance VIP10™ (Vertically Integrated PNP)

complementary bipolar process.

The LMH6654 is packaged in 5-Pin SOT-23 and 8-

Pin SOIC. The LMH6655 is packaged in 8-Pin

VSSOP (DGK) and 8-Pin SOIC.