LMH6514开发板套件编程器的评估板-运算放大器规格书PDF中文资料

LMH6514属于开发板套件编程器的评估板-运算放大器。由美国德州仪器公司制造生产的LMH6514评估板 - 运算放大器运算放大器评估板是装有元器件的电路，用于提供特定集成电路或器件的工作实例。该产品族中的电路板提供了运算放大器实例。每个 IC 的通道类型有单通道、双通道、三通道、四通道和八通道，放大器类型包括音频、自动归零、缓冲器、斩波器、电流反馈、电流检测、差动、差分、四通道、仪表、隔离、J-FET、限幅、对数、功率、可编程增益、采样保持、跨阻、可变增益、视频、电压反馈和零漂移。

1FEATURES

2• Adjustable Gain with a 42 dB Range

• Precise 6.02 dB Gain Steps

• Parallel 3 Bit Gain Control

• On Chip Register Gain Setting

• Fully Differential Signal Path

• Single Ended to Differential Capable

• 200Ω Input Impedance

• Small Footprint (4 mm x 4 mm) WQFN Package

APPLICATIONS

• Cellular Base Stations

• IF Sampling Receivers

• Instrumentation

• Modems

• Imaging

• Differential Line Receiver

KEY SPECIFICATIONS

• 600 MHz bandwidth at 100Ω load

• 39 dBm OIP3 at 75 MHz, 200Ω load

• 26 dB to 38 dB maximum gain

• Selectable output impedance of 200Ω or 400Ω.

• 8.3 dB noise figure

• 5 ns gain step switching time

• 100 mA supply current

DESCRIPTION

The LMH6514 is a high performance, digitally

controlled variable gain amplifier (DVGA). It combines

precision gain control with a low noise, ultra-linear,

differential amplifier. Typically, the LMH6514 drives a

high performance ADC in a broad range of mixed

signal and digital communication applications such as mobile radio and cellular base stations where

automatic gain control (AGC) is required to increase

system dynamic range. When used in conjunction

with a high speed ADC, system dynamic range can

be extended by up to 42 dB.

The LMH6514 has a differential input and output

allowing large signal swings on a single 5V supply. It is designed to accept signals from RF elements and

maintain a terminated impedance environment. The

input impedance is 200Ω resistive. The output

impedance is either 200Ω or 400Ω and is user

selectable. A unique internal architecture allows use

with both single ended and differential input signals.

Input signals to the LMH6514 are scaled by a highly

linear, digitally controlled attenuator with seven

accurate 6 dB steps. The attenuator output provides

the input signal for a high gain, ultra linear differential

transconductor. The transconductor differential output current can be converted into a voltage by using the

on-chip 200Ω or 400Ω loads. The transconductance

gain is 0.1 Amp/Volt resulting in a maximum voltage

gain of +32 dB when driving a 200Ω load, or 38 dB

when driving the 400Ω load.

The LMH6514 operates over the industrial temperature range of −40°C to +85°C. The LMH6514

is available in a 16-Pin, thermally enhanced, WQFN

package.