LMH0366SQSLASHNOPB中文资料德州仪器数据手册PDF规格书

1FEATURES

2• SMPTE ST 424, SMPTE ST 292, and SMPTE ST

259-C Compliant

• Supports 125 Mbps, 270 Mbps, 1.4835 Gbps,

1.485 Gbps, 2.967 Gbps, and 2.97 Gbps Serial

Data Rate Operation

• Supports DVB-ASI at 270 Mbps and MADI at

125 Mbps

• 100 mW Typical Power Consumption (145 mW

with Both Output Drivers Enabled)

• Input Equalization (0-60” FR4) and Input Signal

Detection

• Two Differential, Reclocked Outputs with

Option of Recovered Clock

• Output De-Emphasis to Compensate for up to

40” of FR4 Trace Losses

• 64 x 64 Point Eye Opening Monitor

• 27 MHz External Reference or Referenceless

Operation

• Internally Terminated 100Ω Input with Rail-to-

Rail Input Common Mode Voltage

• Internally Terminated 100Ω LVDS Outputs with

Programmable Output Common Mode Voltage

and Swing

• Single 2.5V Supply Operation

• Power Save Mode with Device Power Down

Control

• Industrial Temperature Range: -40°C to +85°C

APPLICATIONS

• SMPTE ST 424, SMPTE ST 292, and ST SMPTE

259 Serial Digital Interfaces

• Broadcast Video Routers, Switchers, and

Distribution Amplifiers

DESCRIPTION

The LMH0366 3 Gbps HD/SD SDI Low Power

Reclocker with Integrated Eye Monitor retimes serial

digital video data conforming to the SMPTE ST 424,

SMPTE ST 292, and SMPTE ST 259-C standards.

The reclocker operates at serial data rates of 125

Mbps, 270 Mbps, 1.4835 Gbps, 1.485 Gbps, 2.967

Gbps, and 2.97 Gbps.

The LMH0366 automatically detects the incoming

data rate and retimes the data to suppress

accumulated jitter. The reclocker recovers the serial

data-rate clock and optionally provides it as an

output.

The LMH0366 input has an FR4 equalizer capable of

equalizing 0-60” of FR4 trace length, and also

includes signal detection with a programmable

threshold.

The LMH0366 has two differential serial data outputs and offers flexibility in selecting the output signals

between the reclocked data, recovered clock, or

bypassed data. The output drivers offer

programmable de-emphasis for up to 40” of FR4

trace losses, in addition to programmable common

mode voltage and swing for flexible interfacing.

The LMH0366 provides a 64 x 64 point eye monitor

for analyzing the eye quality of the incoming signal.

The LMH0366 supports two modes of operation. In

pin mode, the LMH0366 operates with control pins to

set its operating state. In SPI mode, an optional SPI

serial interface can be used to configure and monitor

multiple LMH0366 devices in a daisy-chain

configuration.