LMC7111中文资料德州仪器数据手册PDF规格书

1 Features

1• Ensured Monotonicity

• Low-Power Operation

• Rail-to-Rail Voltage Output

• Power-On Reset to 0 V

• Simultaneous Output Updating

• Wide Power Supply Range (2.7 V to 5.5 V)

• Industry's Smallest Package

• Power Down Modes

• Key Specifications

– Resolution: 8 Bits

– INL: ±0.5 LSB (Maximum)

– DNL: +0.18 / −0.13 LSB (Maximum)

– Setting Time: 4.5 μs (Maximum)

– Zero Code Error: +15 mV (Maximum)

– Full-Scale Error: −0.75 %FS (Maximum)

– Supply Power:

– Normal: 1.1 mW (3 V) / 2.5 mW (5 V)

Typical

– Power Down: 0.3 μW (3 V) / 0.8 μW (5 V)

Typical

2 Applications

• Battery-Powered Instruments

• Digital Gain and Offset Adjustment

• Programmable Voltage and Current Sources

• Programmable Attenuators

3 Description

The DAC084S085 is a full-featured, general-purpose

QUAD 8-bit voltage-output digital-to-analog converter

(DAC) that can operate from a single 2.7-V to 5.5-V

supply and consumes 1.1 mW at 3 V and 2.5 mW at

5 V. The DAC084S085 is packaged in 10-pin SON

and VSSOP packages. The 10-pin SON package

makes the DAC084S085 the smallest QUAD DAC in

its class. The on-chip output amplifier allows rail-torail

output swing and the three wire serial interface

operates at clock rates up to 40 MHz over the entire

supply voltage range. Competitive devices are limited

to 25-MHz clock rates at supply voltages in the 2.7-V

to 3.6-V range. The serial interface is compatible with

standard SPI, QSPI, MICROWIRE, and DSP

interfaces.

The reference for the DAC084S085 serves all four

channels and can vary in voltage between 1 V and

VA, providing the widest possible output dynamic

range. The DAC084S085 has a 16-bit input shift

register that controls the outputs to be updated, the

mode of operation, the power-down condition, and

the binary input data. All four outputs can be updated

simultaneously or individually depending on the

setting of the two mode of operation bits.