LM94021传感器变送器的温度传感器-模拟数字输出规格书PDF中文资料

LM94021属于传感器变送器的温度传感器-模拟数字输出。由德州仪器制造生产的LM94021温度传感器 - 模拟和数字输出模拟和数字输出温度传感器可用于测量环境热能量。特征包括传感器类型、本地感测温度、远程感测温度、输出类型、电源电压和分辨率。传感器类型为模拟本地/远程/红外、模拟数字、本地/远程、数字本地/远程/红外或内部，感应温度范围为 -55°C 至 200°C。

1FEATURES

2• LM94021Q is AEC-Q100 Grade 0 Qualified and

is Manufactured on an Automotive Grade Flow

• Low 1.5V Operation

• Four Selectable Gains

• Very Accurate Over Wide Temperature Range

of −50°C to +150°C

• Low Quiescent Current

• Output is Short-Circuit Protected

• Extremely Small SC70 Package to•

Footprint Compatible with the Industry-

Standard LM20 Temperature Sensor

• UL Recognized Component

APPLICATIONS

• Cell Phones

• Wireless Transceivers

• Battery Management

• Automotive

• Disk Drives

• Games

• Appliances

DESCRIPTION

The LM94021 is a precision analog output CMOS

integrated-circuit temperature sensor that operates at

a supply voltage as low as 1.5V. While operating over

the wide temperature range of −50°C to +150°C, the

LM94021 delivers an output voltage that is inversely

proportional to measured temperature. The

LM94021's low supply current makes it ideal for

battery-powered systems as well as general

temperature sensing applications.

Two logic inputs, Gain Select 1 (GS1) and Gain

Select 0 (GS0), select the gain of the temperature-to•

voltage output transfer function. Four slopes are

selectable: −5.5 mV/°C, −8.2 mV/°C, −10.9 mV/°C,

and −13.6 mV/°C. In the lowest gain configuration

(GS1 and GS0 both tied low), the LM94021 can

operate with a 1.5V supply while measuring

temperature over the full −50°C to +150°C operating

range. Tying both inputs high causes the transfer

function to have the largest gain of −13.6 mV/°C for

maximum temperature sensitivity. The gain-select

inputs can be tied directly to VDD or Ground without

any pull-up or pull-down resistors, reducing

component count and board area. These inputs can

also be driven by logic signals allowing the system to

optimize the gain during operation or system

diagnostics.