LM90中文资料具有 SMBus 接口的远程和本地温度传感器数据手册TI规格书

描述 Description

The LM90 is an 11-bit digital temperature sensor with a 2-wire System Management Bus (SMBus) serial interface. The LM90 accurately measures its own temperature as well as the temperature of an external device, such as processor thermal diode or diode connected transistor such as the 2N3904. The temperature of any ASIC can be accurately determined using the LM90 as long as a dedicated diode (semiconductor junction) is available on the target die. The LM90 remote sensor accuracy of ±3°C is factory trimmed for the 1.008 typical non-ideality factor of the mobile Pentium III thermal diode. The LM90 has an Offset register to allow measuring other diodes without requiring continuous software management.
Activation of the ALERT output occurs when any temperature goes outside a preprogrammed window set by the HIGH and LOW temperature limit registers or exceeds the T_CRIT temperature limit. Activation of the T_CRIT_A occurs when any temperature exceeds the T_CRIT programmed limit. The LM90 is pin and register compatible with the LM86, Analog Devices ADM1032 and Maxim MAX6657/8.

特性 Features

• Accurately Senses Die Temperature of Remote ICs or Diode Junctions
• On-board Local Temperature Sensing
• Diode Fault Detection Circuitry
• ALERT Output Supports SMBus 2.0 Protocol
• 8-pin VSSOP Package
• Supply Current 0.8 mA (Typ)
• Remote Diode Temp Accuracy (Includes Quantization Error)
• TA=0°C to 85°C, TD=25°C to 125°C, ±4.0 °C (Max)