LM75AIMMXSLASHNOPB中文资料德州仪器数据手册PDF规格书

1 Features

1• No External Components Required

• Shutdown Mode to Minimize Power Consumption

• Up to Eight LM75As can be Connected to a Single

Bus

• Power up Defaults Permit Stand-Alone Operation

as Thermostat

• Key Specifications:

– Supply Voltage

– LM75A: 2.7 V to 5.5 V

– Supply Current

– Operating: 280 μA (Typical)

– Shutdown: 4 μA (Typical)

– Temperature Accuracy

– 25°C to 100°C: ±2°C (Max)

– 55°C to 125°C: ±3°C (Max)

2 Applications

• General System Thermal Management

• Communications Infrastructure

• Electronic Test Equipment

• Environmental Monitoring

3 Description

The LM75A is an industry-standard digital

temperature sensor with an integrated sigma-delta analog-to-digital converter (ADC) and I2C interface.

The LM75A provides 9-bit digital temperature

readings with an accuracy of ±2°C from –25°C to

100°C and ±3°C over –55°C to 125°C.

The LM75A operates with a single supply from 2.7 V

to 5.5 V. Communication is accomplished over a

2-wire interface which operates up to 400 kHz. The

LM75A has three address pins, allowing up to eight

LM75A devices to operate on the same 2-wire bus.

The LM75A has a dedicated overtemperature output

(O.S.) with programmable limit and hysteresis. This

output has programmable fault tolerance, which lets

the user to define the number of consecutive error

conditions that must occur before O.S. is activated.

The wide temperature and supply range and I2C

interface make the LM75A ideal for a number of applications including base stations, electronic test

equipment, office electronics, personal computers,

and any other system in which thermal management

is critical to performance. The LM75A is available in

an SOIC-8 package and an VSSOP-8 package.