LM74501-Q1数据手册TI中文资料规格书

描述 Description

The LM74501-Q1 operates in conjunction with an external N-channel MOSFET as a low loss reverse polarity protection solution. The device supports wide supply input range of 3.2 V to 65 V. The 3.2-V input voltage support is particularly well suited for severe cold crank requirements in automotive systems. The device can withstand and protect the loads from negative supply voltages down to –18 V. The LM74501-Q1 does not have reverse current blocking and is suitable for input reverse polarity protection of loads that can potentially deliver energy back to the input supply such as automotive body control module motor loads.

The LM74501-Q1 controller provides a charge pump gate drive for an external N-channel MOSFET. LM74501-Q1 has a unique integrated feature which allows systems to meet automotive ISO7637 pulse 1 transient requirements without additional TVS Diode (TVS Less). LM74501-Q1 features integrated switch to enable battery voltage monitoring with an external resistor divider. With the enable pin low, the controller is off and draws only around 1 µA of current thus offering low system current when put into sleep mode.

特性 Features

• AEC-Q100 qualified with the following results
• Device temperature grade 1: –40°C to +125°C ambient operating temperature range
• Device HBM ESD classification level 2
• Device CDM ESD classification level C4B

• 3.2-V to 65-V input range (3.9-V start up)
• –18-V reverse voltage rating
• Charge pump for external N-Channel MOSFET
• Gate discharge timer: meets automotive ISO7637-2 pulse1 transient without additional TVS diode (TVS Less)
• 3-µA shutdown current (EN=Low)
• 80-µA typical operating quiescent current (EN=High)
• 20-V VDS clamp (EN=Low)
• Integrated battery voltage monitoring switch (SW)
• 8-pin SOT-23 package 2.90 mm × 1.60 mm