LM73中文资料具有 I2C/SMBus 接口的 ±1°C 温度传感器数据手册TI规格书

描述 Description

The LM73 is an integrated, digital-output temperature sensor featuring an incremental Delta-Sigma ADC with a two-wire interface that is compatible with the SMBus and I2C interfaces. The host can query the LM73 at any time to read temperature. Available in a 6-pin SOT package, the LM73 occupies very little board area while operating over a wide temperature range (–40°C to 150°C) and providing ±1°C accuracy from –10°C to 80°C. The user can optimize between the conversion time and the sensitivity of the LM73 by programming it to report temperature in any of four different resolutions. Defaulting to 11-bit mode (0.25°C/LSB), the LM73 measures temperature in a maximum time of 14 ms, making it ideal for applications that require temperature data very soon after power-up. In its maximum resolution, 14-bit mode (0.03125°C/LSB), the LM73 is optimized to sense very small changes in temperature. A single multi-level address line selects one of three unique device addresses. An open-drain ALERT output goes active when the temperature exceeds a programmable limit. Both the data and clock lines are filtered for excellent noise tolerance and reliable communication. Additionally, a time-out feature on the clock and data lines causes the LM73 to automatically reset these lines if either is held low for an extended time, thus exiting any bus lock-up condition without processor intervention.

特性 Features

• Single Address Pin Offers Choice of Three Selectable Addresses Per Version for a Total of Six Possible Addresses.
• Supports 400-Khz Operation
• Programmable Digital Temperature Resolution From 11 Bits to 14 Bits
• Open-Drain ALERT Output Pin Goes Active When Temperature is Above a Programmed Temperature Limit
• UL Recognized Component
•  Supply Current
• 320 µA (Typical)
• Shutdown
• 1.9 µA (Typical)
• Temperature Accuracy
• −25°C to 115°C: ±1.5°C (Maximum)
• Resolution
• Conversion Time
• 14-Bit (0.03125°C): 112 ms (Maximum)