LM6588MTSLASHNOPB.A中文资料德州仪器数据手册PDF规格书

1FEATURES

23• (VS = 5V, TA = 25°C Typical Values Unless

Specified)

• Input Common Mode Voltage 0.5V Beyond

Rails

• Output Voltage Swing (RL = 2kΩ) 50mV from

Rails

• Output Short Circuit Current ±200mA

• Continuous Output Current 75mA

• Supply Current (Per Amp, No Load) 750μA

• Supply Voltage Range 5V to 16V

• Unity Gain Stable

• −3dB Bandwidth (A V = +1) 24MHz

• Slew Rate 11V/μSec

• Settling Time 270ns

• SOIC-14 and TSSOP-14 Package

• Manufactured in TI’s State-of-the-art Bonded

Wafer, Trench Isolated Complementary Bipolar

VIP10™ Technology for High Performance at

Low Power Levels

APPLICATIONS

• LCD Panel VCOM Driver

• LCD Panel Gamma Buffer

• LCD Panel Repair Amp

DESCRIPTION

The LM6588 is a low power, high voltage, rail-to-rail

input-output amplifier ideally suited for LCD panel

VCOM driver and gamma buffer applications. The

LM6588 contains four unity gain stable amplifiers in

one package. It provides a common mode input

ability of 0.5V beyond the supply rails, as well as an

output voltage range that extends to within 50mV of

either supply rail. With these capabilities, the LM6588

provides maximum dynamic range at any supply

voltage. Operating on supplies ranging from 5V to

16V, while consuming only 750μA per amplifier, the

LM6588 has a bandwidth of 24MHz (−3dB).

The LM6588 also features fast slewing and settling

times, along with a high continuous output capability

of 75mA. This output stage is capable of delivering

approximately 200mA peak currents in order to

charge or discharge capacitive loads. These features

are ideal for use in TFT-LCDs.

The LM6588 is available in the industry standard 14-

pin SOIC package and in the space-saving 14-pin

TSSOP package. The amplifiers are specified for

operation over the full −40°C to +85°C temperature

range.