LM65645-Q1数据手册TI中文资料规格书

描述 Description

The LM656x5-Q1 are a family of automotive buck converters designed for high efficiency, high power density, and ultra-low electromagnetic interference (EMI). The converters operate over a wide input voltage range of 3V to 65V (70V tolerant) reducing the need for external input surge protection. The LM656x5-Q1 comes with pin selectable fixed output voltages of 3.3V and 5V or in adjustable configuration. The low EMI operation is enabled with minimized loop inductance and optimized switch node slew rate. A pin-selectable ±5% or ±10% dual-random spread spectrum (DRSS) significantly reduces peak emissions through a combination of triangular and pseudo-random modulation while keeping output voltage ripple very low. The current-mode control architecture with a 30ns typical minimum on-time allows high conversion ratios at high frequencies coupled with a fast transient response and excellent load and line regulation.

特性 Features

AEC-Q100 qualified for automotive applications:

Temperature grade 1: –40°C to +125°C, TA



Wide input voltage range: 3V to 65V

Designed for low EMI requirements

Facilitates CISPR 25 class 5 compliance

Mode pin configurable ±5% or ±10% dual-random spread spectrum reducing peak emissions

Enhanced HotRod™ QFN package with symmetrical pinout

Switching frequency from 300kHz to 2.2MHz

Pin-configurable 400kHz and 2.2MHz

Pin-configurable AUTO or FPWM operation



Low minimum on time: 40ns (maximum)

Enables 36V to 3.3V conversion at 2.2MHz



High-efficiency power conversion at all loads

> 94% peak efficiency at 24VIN, 5VOUT, 400kHz

2.5µA PFM no-load input current



High power density

Internal compensation, current limit, and TSD

3.6mm × 2.6mm, wettable flank, 20-pin package

ϴJA = 25.5°C/W (LM65645-Q1EVM)



Create a custom design using the LM656x5-Q1 with the WEBENCH Power Designer