LM6132BIMXSLASHNOPB.B中文资料德州仪器数据手册PDF规格书

1 Features

1• (For 5V Supply, Typ Unless Noted)

• Rail-to-Rail Input CMVR −0.25 V to 5.25 V

• Rail-to-Rail Output Swing 0.01V to 4.99V

• High Gain-Bandwidth, 10 MHz at 20 kHz

• Slew Rate 12 V/μs

• Low Supply Current 360 μA/Amp

• Wide Supply Range 2.7 V to over 24 V

• CMRR 100 dB

• Gain 100 dB with RL = 10 k

• PSRR 82 dB

2 Applications

• Battery Operated Instrumentation

• Instrumentation Amplifiers

• Portable Scanners

• Wireless Communications

• Flat Panel Display Driver

3 Description

The LM6132/34 provides new levels of speed vs.

power performance in applications where low voltage supplies or power limitations previously made

compromise necessary. With only 360 μA/amp supply

current, the 10 MHz gain-bandwidth of this device

supports new portable applications where higher power devices unacceptably drain battery life.

The LM6132/34 can be driven by voltages that exceed both power supply rails, thus eliminating

concerns over exceeding the common-mode voltage

range. The rail-to-rail output swing capability provides

the maximum possible dynamic range at the output.

This is particularly important when operating on low

supply voltages. The LM6132/34 can also drive large capacitive loads without oscillating.

Operating on supplies from 2.7 V to over 24 V, the

LM6132/34 is excellent for a very wide range of

applications, from battery operated systems with

large bandwidth requirements to high speed

instrumentation.