LM5145集成电路（IC）的DC-DC开关控制器规格书PDF中文资料

LM5145属于集成电路（IC）的DC-DC开关控制器。由德州仪器制造生产的LM5145DC-DC 开关控制器PMIC（电源管理集成电路）DC 到 DC 开关式控制器是用于高效率电路的稳压 IC，其配置为生成高于（突升或步升）或低于（突降或步降）输入电源的输出电源电压。其他拓扑结构可能包括：降压-升压、反激、正激、Cuk、SEPIC、全桥、半桥和推挽式。这些器件不同于需要最小电压并“烧尽”多余电压的线性稳压器。

1 Features

• Functional Safety-Capable

– Documentation available to aid functional safety

system design

• Functional Safety-Compliant options – SIL 2 and

SIL 3 – available through request (LM25137F)

• Dual-channel synchronous buck DC/DC controller

– Wide input voltage range of 4V to 42V

– 1% accurate, fixed 3.3V, 5V, 12V, or adjustable

outputs from 0.8V to 36V

– 150°C maximum junction temperature

– Charge-pump gate drivers for 100% duty cycle

– No-load sleep current of 9μA (typical)

• Two interleaved synchronous buck channels

– Dual channel or single-output multiphase

– Stackable up to four phases

– SYNC in and SYNC out capability

– Selectable light-load PFM or FPWM

• Inherent protection features for robust design

– Internal hiccup-mode overcurrent protection

– Independent ENABLE and PGOOD functions

– Adjustable output voltage soft start

– VCC and gate-drive UVLO protection

– Shunt or inductor DCR current sensing

– Thermal shutdown protection with hysteresis

• Designed for ultra-low EMI requirements

– Dual Random Spread Spectrum (DRSS)

– Switching frequency from 100kHz to 2.64MHz

• VQFN-36 package with wettable flanks

• Create a custom design using the LM25137 with

WEBENCH® Power Designer

2 Applications

• Personal electronics: computer peripherals

• Industrial: 24V bus systems, power delivery

• Enterprise systems: high-performance computing

3 Description

The LM25137 is a 42V synchronous buck DC/DC

controller offered from a family with three options for

functional safety: Capable, SIL 2, and SIL 3. The

device uses an interleaved, stackable, peak currentmode

architecture for easy loop compensation, fast

transient response, excellent load and line regulation,

and accurate current sharing with paralleled phases

for high output current.

A high-side switch minimum on-time of 22ns facilitates

large step-down ratios, enabling the direct conversion

from 12V and 24V inputs to low-voltage rails for

reduced system design cost and complexity. The

LM25137 continues to operate during input voltage

dips as low as 4V, at 100% duty cycle if needed.

The 1.5μA sleep quiescent current with the output

voltage in regulation extends operating run-time in

battery-powered systems.