LM5070MTC-80/NOPB集成电路（IC）的以太网供电（PoE）控制器规格书PDF中文资料

LM5070MTC-80/NOPB属于集成电路（IC）的以太网供电（PoE）控制器。由美国德州仪器公司制造生产的LM5070MTC-80/NOPB以太网供电（PoE）控制器以太网供电 (PoE) 控制器允许设计人员通过单个以太网连接传输电流和数据。远程设备通过以太网电缆供电，因此无需电池、本地电源适配器和其他电源电缆。桥式整流器和 N+1 O-Ring 是两种 PoE 控制器类型。可用特性可能包括 N 和 P 沟道 FET、内部开关和汽车认证。

FEATURES

• Fully Compliant 802.3af Power Interface Port

• 80V, 1Ω, 400 mA Internal MOSFET

• Programmable Inrush Current Limit

• Detection Resistor Disconnect Function

• Programmable Classification Current

• Programmable Under-voltage Lockout with

Programmable Hysteresis

• Thermal Shutdown Protection

• Current Mode Pulse Width Modulator

• Supports Both Isolated and Non-Isolated

Applications

• Error Amplifier and Reference for Non-Isolated

Applications

• Programmable Oscillator Frequency

• Programmable Soft-Start

• 80% Maximum Duty Cycle Limiter, Slope

Compensation (-80 device)

• 50% Maximum Duty Cycle Limiter, No Slope

Compensation (-50 device)

• 800 mA Peak Gate Driver

DESCRIPTION

The LM5070 power interface port and pulse width

modulation (PWM) controller provides a complete

integrated solution for Powered Devices (PD) that

connect into Power over Ethernet (PoE) systems. The

LM5070 integrates an 80V, 400mA line connection

switch and associated control for a fully IEEE 802.3af compliant interface with a full featured current mode

pulse width modulator dc-dc converter. All power

sequencing requirements between the controller

interface and switch mode power supply (SMPS) are

integrated into the IC. Two options are available providing either an 80% maximum duty cycle limit

with slope compensation (on the –80 suffix) device or

50% maximum duty cycle limit and no slope

compensation on the (–50 suffix) device.