LM5041集成电路（IC）的PMIC-稳压器-DCDC开关式控制器规格书PDF中文资料

LM5041属于集成电路（IC）的PMIC-稳压器-DCDC开关式控制器。由德州仪器制造生产的LM5041DC-DC 开关控制器PMIC（电源管理集成电路）DC 到 DC 开关式控制器是用于高效率电路的稳压 IC，其配置为生成高于（突升或步升）或低于（突降或步降）输入电源的输出电源电压。其他拓扑结构可能包括：降压-升压、反激、正激、Cuk、SEPIC、全桥、半桥和推挽式。这些器件不同于需要最小电压并“烧尽”多余电压的线性稳压器。

1FEATURES

2• Internal Start-up Bias Regulator

• Programmable Line Under-Voltage Lockout

(UVLO) with Adjustable Hysteresis

• Current Mode Control

• Internal Error Amplifier with Reference

• Dual Mode Over-Current Protection

• Leading Edge Blanking

• Programmable Push-Pull Overlap or Dead

Time

• Internal 1.5A Push-Pull Gate Drivers

• Programmable Soft-start

• Programmable Oscillator with Sync Capability

• Precision Reference

• Thermal Shutdown

APPLICATIONS

• Telecommunication Power Converters

• Industrial Power Converters

• Multi-Output Power Converters

• +42V Automotive Systems

PACKAGES

• TSSOP-16

• WSON-16 (5x5 mm) Thermally Enhanced

DESCRIPTION

The LM5041 PWM controller contains all of the

features necessary to implement either current-fed or

voltage-fed push-pull or bridge power converters.

These “Cascaded” topologies are well suited for

multiple output and higher power applications. The

LM5041’s four control outputs include: the buck stage

controls (HD and LD) and the push-pull control

outputs (PUSH and PULL). Push-pull outputs are

driven at 50% nominal duty cycle at one half of the

switching frequency of the buck stage and can be

configured for either a specified overlap time (for

current-fed applications) or a specified both-off time

(for voltage-fed applications). Push-pull stage

MOSFETs can be driven directly from the internal

gate drivers while the buck stage requires an external

driver such as the LM5102. The LM5041 includes a high-voltage start-up regulator that operates over a

wide input range of 15V to 100V. The PWM controller

is designed for high-speed capability including an

oscillator frequency range up to 1 MHz and total

propagation delays of less than 100ns. Additional

features include: line Under-Voltage Lockout (UVLO),

soft-start, an error amplifier, precision voltage

reference, and thermal shutdown.