LM5005中文资料7V 至 75V 宽输入电压、2.5A 电流模式非同步降压稳压器数据手册TI规格书

描述 Description

The LM5005 high-voltage buck converter features all of the functions necessary to implement an efficient high-voltage switching regulator with a minimum number of external components. This easy-to-use converter operates over an input voltage range from 7 V to 75 V and delivers a maximum output current of 2.5 A. The control loop architecture is based upon current-mode control using an emulated current ramp for high noise immunity. Current-mode control provides inherent line feed-forward, cycle-by-cycle overcurrent protection and straightforward loop compensation. The use of an emulated control ramp reduces noise sensitivity of the PWM circuit, allowing reliable control of small duty cycles necessary in high input voltage applications.

The switching frequency is resistor-programmable from 50 kHz to 500 kHz. To reduce EMI, an oscillator synchronization pin allows multiple LM5005 regulators to self-synchronize or be synchronized to an external clock signal. Additional protection features include configurable soft start, external power supply tracking, thermal shutdown with automatic recovery, and remote shutdown capability.

The LM5005 is available in an 20-pin HTSSOP package with an exposed pad that is soldered to the PCB to achieve a low junction-to-board thermal impedance. To create a custom regulator design, use the LM5005 with WEBENCH® Power Designer.

特性 Features

• High-Efficiency DC-DC Buck Converter
• Adjustable Output Voltage as Low as 1.225 V
• Junction Temperature Range –40°C to 125°C
• Integrated 75-V, 160-mΩ Buck MOSFET
• ±1.5% Feedback Voltage Accuracy
• Ultra-Fast Line and Load Transient Response
• Switching Frequency From 50 kHz to 500 kHz
• 80-ns Minimum PWM ON Time For Low VOUT
• Internal High-Voltage VCC Bias Supply Regulator
• Configurable Soft Start With Tracking
• Programmable Input UVLO With Hysteresis
• Remote Shutdown and Standby Control
• VCC and Gate Drive UVLO Protection
• Thermally-Enhanced 20-Pin HTSSOP Package