LM4927中文资料2.5W 单声道、模拟输入 AB 类音频放大器数据手册TI规格书

描述 Description

The LM4927 is a fully differential audio power amplifier primarily designed for demanding applications in mobile phones and other portable communication device applications. It is capable of delivering 2.5 watts of continuous average power to a 4Ω load with less than 10% distortion (THD+N) from a 5VDC power supply.Boomer audio power amplifiers were designed specifically to provide high quality output power with a minimal amount of external components. The LM4927 does not require output coupling capacitors or bootstrap capacitors, and therefore is ideally suited for mobile phone and other low voltage applications where minimal power consumption is a primary requirement.The LM4927 features a low-power consumption shutdown mode. To facilitate this, Shutdown may be enabled by logic low. Additionally, the LM4927 features an internal thermal shutdown protection mechanism.The LM4927 contains advanced pop & click circuitry which eliminates noises which would otherwise occur during turn-on and turn-off transitions.

特性 Features

• Fully Differential Amplification
• Ultra Low Current Shutdown Mode
• Improved Pop & Click Circuitry Eliminates Noises During Turn-On and Turn-Off Transitions
• No Output Coupling Capacitors, Snubber Networks or Bootstrap Capacitors Required
• Improved PSRR at 217Hz, 85dB (Typ)
• Power Output at 3.3V @ 1% THD, 550mW (Typ)
• Shutdown Current, 0.1µA (Typ)
Boomer is a trademark of Texas Instruments.