LM2734YQMKXSLASHNOPB.A中文资料德州仪器数据手册PDF规格书

1 Features

1• AEC-Q100 Qualified for Automotive Applications:

– Device Temperature Grade 1: -40°C to

+125°C, TA

• Thin SOT-6 Package

• 3-V to 20-V Input Voltage Range

• 0.8-V to 18-V Output Voltage Range

• 1-A Output Current

• 550-kHz (LM2734Y) and 1.6-MHz (LM2734X)

Switching Frequencies

• 300-mΩ NMOS Switch

• 30-nA Shutdown Current

• 0.8-V, 2% Internal Voltage Reference

• Internal Soft Start

• Current-Mode, PWM Operation

• Thermal Shutdown

• Create a Custom Design Using the LM2734-Q1

With WEBENCH® Power Designer

2 Applications

• Automotive

• Local Point-of-Load Regulation

• Advanced Driver Assistance Systems (ADAS)

3 Description

The LM2734-Q1 regulator is a monolithic, highfrequency,

PWM step-down DC/DC converter in a 6-

pin Thin SOT package. The device provides all the

active functions to provide local DC/DC conversion

with fast transient response and accurate regulation

in the smallest possible PCB area.

With a minimum of external components and online

design support through WEBENCH, the LM2734-Q1

regulator is easy to use. The ability to drive 1-A loads

with an internal 300-mΩ NMOS switch using state-ofthe-

art 0.5-μm BiCMOS technology results in the best

power density available. The world-class control

circuitry allows for on-times as low as 13 ns, thus

supporting exceptionally high-frequency conversion

over the entire 3-V to 20-V input operating range

down to the minimum output voltage of 0.8 V.

Switching frequency is internally set to 550 kHz

(LM2734Y) or 1.6 MHz (LM2734X), allowing the use

of extremely small surface-mount inductors and chip

capacitors. Even though the operating frequencies

are very high, efficiencies up to 90% are easy to

achieve. External shutdown is included, featuring an

ultra-low standby current of 30 nA.

The LM2734-Q1 regulator uses current-mode control

and internal compensation to provide highperformance

regulation over a wide range of

operating conditions. Additional features include

internal soft-start circuitry to reduce inrush current,

pulse-by-pulse current limit, thermal shutdown, and

output overvoltage protection.