LM27中文资料具有固定跳变点、工作温度范围为 120°C 至 150°C 的 ±3°C 温度开关数据手册TI规格书

描述 Description

The LM27 is a precision, single digital-output, low-power thermostat comprised of an internal reference, DAC, temperature sensor and comparator. Utilizing factory programming, it can be manufactured with different trip points as well as different digital output functionality. The trip point (TOS) can be preset at the factory to any temperature in the range of +120°C to +150°C in 1°C increments. The LM27 has one digital output (OS/OS/US/US), one digital input (HYST) and one analog output (VTEMP). The digital output stage can be preset as either open-drain or push-pull. In addition, it can be factory programmed to be active HIGH or LOW. The digital output can be factory programmed to indicate an over temperature shutdown event (OS or OS) or an under temperature shutdown event (US or US). When preset as an overtemperature shutdown (OS) it will go LOW to indicate that the die temperature is over the internally preset TOS and go HIGH when the temperature goes below (TOS–THYST). Similarly, when preprogrammed as an undertemperature shutdown (US) it will go HIGH to indicate that the temperature is below TUS and go LOW when the temperature is above (TUS+THYST). The typical hysteresis, THYST, can be set to 2°C or 10°C and is controlled by the state of the HYST pin. A VTEMP analog output provides a voltage that is proportional to temperature and has a −10.7mV/°C output slope.

Currently, there are several standard parts available, see . For other part options, contact a Texas Instruments Distributor or Sales Representative for information on minimum order qualification. The LM27 is currently available in a 5-lead SOT-23 package.

特性 Features

• Internal Comparator with Pin Selectable 2°C or 10°C Hysteresis
• Open-drain or Push-pull Digital Output; Supports CMOS Logic Levels
• VTEMP Output Allows After-assembly System Testing
• Currently Available in 5-pin SOT-23 Plastic Package
• Power Supply Voltage 2.7V to 5.5V
• Hysteresis Temperature 2°C or 10°C (Typ)
• Temperature Trip Point Accuracy ±3°C (Max)