LM26003MHSLASHNOPB.A中文资料德州仪器数据手册PDF规格书

1 Features

1• LM26003-Q1 is an Automotive-Grade Product

That is AEC-Q100 Grade 1 Qualified (–40°C to

+125°C Operating Junction Temperature)

• High-Efficiency Sleep Mode

• 40-μA Typical Iq in Sleep Mode

• 10.8-μA Typical Iq in Shutdown Mode

• 3.0-V Minimum Input Voltage

• 4.0-V to 38-V Continuous Input Range

• 1.5% Reference Accuracy

• Cycle-by-Cycle Current Limit

• Adjustable Frequency (150 kHz to 500 kHz)

• Synchronizable to an External Clock

• Power Good Flag

• Forced PWM Function

• Adjustable Soft-Start

• 20-Pin HTSSOP Package

• Thermal Shut Down

2 Applications

• Automotive Telematics

• Navigation Systems

• In-Dash Instrumentation

• Battery-Powered Applications

• Standby Power for Home Gateways and Set-Top

Boxes

3 Description

The LM26003 is a switching regulator designed for

the high-efficiency requirements of applications with

standby modes. The device features a low-current sleep mode to maintain efficiency under light-load

conditions and current-mode control for accurate

regulation over a wide input voltage range. Quiescent

current is reduced to 10.8 μA typically in shutdown

mode and less than 40 μA in sleep mode. Forced

PWM mode is also available to disable sleep mode.

The LM26003 device can deliver up to 3 A of

continuous load current with a fixed current limit,

through the internal N-channel switch. The part has a

wide input voltage range of 4.0 V to 38 V and can

operate with input voltages as low as 3 V during line transients.

Operating frequency is adjustable from 150 kHz to 500 kHz with a single resistor and can be

synchronized to an external clock.

Other features include Power Good, adjustable soft-

start, enable pin, input undervoltage protection, and

an internal bootstrap diode for reduced component

count.