LM10011SDX/NOPB集成电路（IC）的特殊用途稳压器规格书PDF中文资料

LM10011SDX/NOPB属于集成电路（IC）的特殊用途稳压器。由美国德州仪器公司制造生产的LM10011SDX/NOPB特殊用途稳压器该系列产品用于电源控制、某种形式的转换，适用于特定的复杂应用。因此，各种产品特性集差异较大，包括空燃比传感器接口、汽车交流发电机电压调节、DDR 端接、液体透镜控制、摩托车转向信号控制、热电 (peltier) 冷却器控制、压电触觉控制、阀门控制、小型发动机管理等。

1 Features

1• 1.0% Output Current Accuracy (0°C to 100°C)

• 1.25% Output Current Accuracy (–40°C to 125°C)

• Input Voltage Range: 2.97 V to 5.5 V

• Pin Selectable VID Format (6- or 4-bit)

• 16 Selectable Start-Up Currents

• Precision Enable to Support Custom UVLO

• SON-10 3-mm × 3-mm Footprint, 0.5-mm Pitch

• Footprint Compatible with the LM10010

2 Applications

• Broadband, Networking, and Wireless

Communications

• Notebook Power Solutions

• Portable Instruments

• Battery-Powered Equipment

• Powering Digital Loads with a 6-bit or 4-bit, 4-Pin

VID Interface

3 Description

The LM10011 is a precision, digitally programmable

device used to control the output voltage of a DC/DC converter. The LM10011 outputs a dc current

proportional to a 6-bit or 4-bit input word. By

connecting the IDAC_OUT pin to the feedback node

of a regulator, the regulator output voltage can be adjusted to a desired range and resolution set by the

user. As the input word counts up, the output voltage

is adjusted higher based on the values of the

feedback resistors in the converter.

The current from the IDAC_OUT pin on start-up is

programmable by an external resistor to cover the

range of 0 to 56.4 μA with 4 bits of resolution. The

MODE pin allows programming of the device through a 4-bit parallel VID interface or through a 6-bit

interface consisting of upper and lower 3-bit VID

codes. The LM10011 is specifically designed to

program a wide variety of Texas Instruments DC/DC

converters for VID (Voltage Identification)

applications.