Description

The LLC6 Series is a plug-in, single-probe conductive liquid

level control designed for low liquid level cutoff protection. It

offers a factory fixed time delay of 1 - 60s and is available in

input voltages of 24, 120, or 230VAC. LED indicator illuminates

whenever the LLC6’s 10A, SPDT output relay is energized.

Available with automatic/manual reset or a special manual reset

with power outage feature, which auto resets the unit when

power is restored and the water level is acceptable. 24VAC and

120VAC units are recognized as limit switches under UL353

(230VAC units are UL508) and CSA certified under Standard 14.

Operation

Automatic Reset (Reset terminals not connected): When

liquid rises to the low level cutoff probe, the output relay and

the LED indicator energize. When the liquid falls below low level

cutoff probe, the output relay and the LED indicator de-energize

after a fixed time delay.

Manual Reset (Reset switch connected): When the liquid

level falls below the low level probe, the output relay and LED

de-energize after a fixed time delay. When the liquid level rises

to the low level probe, the output relay and LED indicator remain

de-energized until the manual reset switch is opened; then they

energize immediately.

Power Outage Manual Reset (Reset switch connected): A

power outage causes the output relay and LED indicator to

de-energize. Upon restoration of power, if the liquid level is

above the low level probe, the output relay and LED indicator

will re-energize. If the liquid level is below the low level probe,

the output relay and LED indicator remain de-energized until the

Normally Closed (NC) reset switch is opened.

FEATURES BENEFITS

Isolated 12VAC on probe Prevents electrolysis

Industry standard 11-pin

octal plug connection Eliminates need for special connectors

LED indication Visual indication output relay is energized

Power outage protection

(see ordering table

for models)

Automatically resets the unit when power is

restored and the water level is acceptable

LLC6210F10M属于工业自动化与控制 > 控制器 - 液体，液位。力特公司制造生产的LLC6210F10M控制器 - 液体，液位工业液位控制器用于监控恒定液位、高液位或低液位，以及泄漏检测类型的感应。其他特性可能包括可调节的灵敏度、内置定时器、LED 指示、过滤器报警和自动关闭阀门。一旦检测到 DPDT、DPST、SPDT 和 SPST 功能的触头外形变化，固态或机械触头便会致动。