LK112数据手册集成电路（IC）的稳压器-线性规格书PDF

描述 Description

The LK112 is a low-dropout linear regulator with a built-in electronic switch. The internal switch can be controlled by TTL or CMOS logic levels. The device is on-state when the control pin is pulled to a logic high level. An external capacitor can be connected to the noise bypass pin to reduce the output noise level to 30 μVrms. An internal PNP pass transistor is used to achieve a low-dropout voltage. The LK112 has a very low quiescent current in on mode while in off mode Iqis reduced below 100 nA max. The internal thermal shutdown circuitry limits the junction temperature below 150 °C. Load current is internally monitored and the device shuts down in the presence of a short-circuit or overcurrent condition on the output.

特性 Features

• Output current up to 150 mA
• Low-dropout voltage (350 mV at IOUT= 150 mA)
• Very low quiescent current:
•0.1 μA in OFF mode and max. 250 μA in ON mode at IOUT= 0 mA
• Low output noise:
•typ. 30 μV at IOUT= 60 mA and 10 Hz < f < 80 kHz
• Wide range of output voltages
• Internal current and thermal limit
• Operative input voltage from:
•VOUT+ 0.5 to 14 V (for VOUT> 2 V) or from 2.5 V to 14 V (for VOUT< 2 V)

简介

LK112属于集成电路（IC）的稳压器-线性。由制造生产的LK112稳压器 - 线性线性稳压器用于提供稳定的输出电压，无论负载电流、输入电压或环境因素如何变化，这些输出电压通常都要保持不变。它们的工作原理要求输入电压维持在高于所需的输出电压，而且要超出某个最小量，并且在工作时会将输入端的任何多余电压转换为热量。对于大多数应用而言，虽然这种稳压器的效率低于开关模式的稳压器，但它们通常更适合对噪声高度敏感的应用。