LF33CDT-TRY集成电路（IC）的线性+开关稳压器规格书PDF中文资料

LF33CDT-TRY属于集成电路（IC）的线性+开关稳压器。由意法半导体集团制造生产的LF33CDT-TRY稳压器 - 线性线性稳压器用于提供稳定的输出电压，无论负载电流、输入电压或环境因素如何变化，这些输出电压通常都要保持不变。它们的工作原理要求输入电压维持在高于所需的输出电压，而且要超出某个最小量，并且在工作时会将输入端的任何多余电压转换为热量。对于大多数应用而言，虽然这种稳压器的效率低于开关模式的稳压器，但它们通常更适合对噪声高度敏感的应用。

特性 Features

 Very low-dropout voltage (0.45 V)

 Very low quiescent current (typ. 50 μA in OFF mode, 500 μA in ON mode)

 Output current up to 500 mA

 Logic-controlled electronic shutdown

 Output voltages of 1.5; 1.8; 2.5; 3.3; 4.7; 5; 6; 8; 8.5; 9; 12 V

 Automotive grade product: 1.8 V, 2.5 V, 3.3 V, 5.0 V, 8.0 V, 8.5 V VOUT in DPAK and PPAK packages

 Internal current and thermal limit

 Only 2.2 μF for stability

 Available in ±1% (AB), ±1.5% (AC) or ±2% (C) selection at 25 °C

 Supply voltage rejection: 80 db (typ.)

 Temperature range: from -40 to 125 °C

描述 Description

The LFXX is a very low drop regulator available in TO-220, TO-220FP, DPAK and PPAK packages and in a wide range of output voltages. The low drop voltage (0.45 V) and low quiescent current make it particularly suitable for low-noise, low-power applications and especially in battery-powered systems. In the 5 pin configuration (PPAK) a shutdown logic control function is available (pin 2, TTL compatible). This means that when the device is used as a local regulator, a part of the board can be put in standby, decreasing the total power consumption. In the three terminal configuration, the device has the same electrical performance, but it is fixed in ON state. It requires a capacitor of only 2.2 μF for stability, saving board space and costs. The LFXX is available as automotive grade in DPAK and PPAK packages, for the options of output voltages whose commercial part numbers are shown in the order codes. These devices are qualified according to the specification AEC-Q100 of the automotive market, in the temperature range -40 °C to 125 °C, and the statistical tests PAT, SYL, SBL are performed.