LE79228中文资料ZARLINK数据手册PDF规格书

APPLICATIONS

„ Voice over IP/DSL — Integrated Access Devices (IAD),

Smart Residential Gateways (SRG), Home Gateway/

Router

„ Cable Telephony — NIU, Set-Top Box, Home Side

Box, Cable Modem, Cable PC

„ Fiber — Fiber in the Loop (FITL), Fiber to the

Home (FTTH)

„ Wireless Local Loop, Intelligent PBX

„ DLC-MUX

„ CO

FEATURES

„ High performance digital signal processor provides

programmable control of all major line card functions

— A-law/µ-law and linear codec/filter

– Transmit and receive gain

– Two-wire AC impedance

– Transhybrid balance

– Equalization

— DC loop feeding

– Smooth or abrupt polarity reversal

— Loop supervision

– Off-hook debounce circuit

– Ground-key and ring-trip filters

— Internal ringing generation and integrated ring-trip

detection

— Adaptive hybrid balance

— Line and circuit testing

– Meets GR-909 and GR-844 test requirements

— Tone generation (DTMF, FSK, random noise, and

arbitrary tone)

— Metering generation at 12 kHz and 16 kHz

– Envelope shaping and level control

— Modem Tone Detection

„ Selectable PCM/MPI or GCI digital interfaces

— Supports most available master clock frequencies from

512 kHz to 8.192 MHz

„ General purpose I/O pins

„ +3.3 V DC operation

„ Exceeds LSSGR and ITU requirements

„ Supports external ringing with on-chip ring-trip circuit

— Automatic or manual ring-trip modes

„ Supports CallerNumber Identification (CID) tone

generation

DESCRIPTION

The Le79228 Quad Intelligent Subscriber Line Audioprocessing Circuit (ISLAC™) device, in combination with a

VE790 series ISLIC™ device, implements a four-channel

universal telephone line interface. This enables the design of a

single, low cost, high performance, fully software

programmable line interface for multiple country applications.

All AC, DC, and signaling parameters are fully programmable

via microprocessor or GCI interfaces. Additionally, the

Le79228 Quad ISLAC device has integrated self-test and linetest capabilities to resolve faults to the line or line circuit. The

integrated test capability is crucial for remote applications

where dedicated test hardware is not cost effective.