Subminiature Photointerrupter

Features ˙Compact package based on the double-mold method. ˙High resolution (slit width = 0.3mm). ˙Gap between emitter and detector is 1.2mm. Applications ˙Floppy disk drives ˙Printers ˙Cameras

文件：122.83 Kbytes 页数：3 Pages

LETEX

丽太科技

Single Pole OptoMOS Relay

Description LCA125 is a 300V, 170mA, 16Ω 1-Form-A relay. It features enhanced peak load current capability with a 300V peak load voltage. Current limiting version is available. (“L” suffix) Features • Small 6 Pin DIP Package • Low Drive Power Requirements (TTL/CMOS Compatible) • No Moving Par

文件：105.23 Kbytes 页数：6 Pages

CLARE

Clare, Inc.

Single-Pole, Normally Open OptoMOS Relay

Description LCA125 is a 300V, 170mA, 16, normally open (1-Form-A) solid state relay that uses optically coupled MOSFET technology to provide 3750Vrms of input to output isolation. Its optically coupled outputs, which use the patented OptoMOS architecture, are controlled by a highly efficient Ga

文件：120.48 Kbytes 页数：7 Pages

IXYS

艾赛斯

Single Pole OptoMOS Relay

Description LCA125L is a 300V, 170mA, 20Ω 1-Form-A relay. It features enhanced peak load current capability with a 300V peak load voltage. Current limiting version is available. (“L” suffix) Features • Small 6 Pin DIP Package • Low Drive Power Requirements (TTL/CMOS Compatible) • No Moving Pa

文件：101 Kbytes 页数：6 Pages

CLARE

Clare, Inc.