Pre-Driver IC for Brushless Motor Drive in Electric Bicycles

Overview The LB11690 and LB11690H are three-phase bipolar PWM drive pre-driver ICs that allow the output circuits to be implemented using only n-channel FETs. These ICs can implement, at low cost, high-efficiency drive circuits in applications that use motors that require high drive currents. T

文件：201.6 Kbytes 页数：19 Pages

SANYO

三洋

THREE-TERMINAL VOLTAGE REGULATOR

DESCRIPTION The TK116xxU series devices are low dropout, linear 3-terminal regulators. An internal PNP pass-transistor is used in order to achieve low dropout voltage (typically 160 mV at 80 mA load current). The regulated output voltages of 3, 3.3, 5 and 9 V are available. The device has

文件：78.1 Kbytes 页数：14 Pages

TOKO

THREE-TERMINAL VOLTAGE REGULATOR

DESCRIPTION The TK116xxU series devices are low dropout, linear 3-terminal regulators. An internal PNP pass-transistor is used in order to achieve low dropout voltage (typically 160 mV at 80 mA load current). The regulated output voltages of 3, 3.3, 5 and 9 V are available. The device has

文件：78.1 Kbytes 页数：14 Pages

TOKO

Non return valve

文件：109.22 Kbytes 页数：1 Pages

FESTOFesto Corporation.

费斯托费斯托（中国）有限公司

Pre-Driver IC for Brushless Motor Drive in Electric Bicycles

Overview The LB11690 and LB11690H are three-phase bipolar PWM drive pre-driver ICs that allow the output circuits to be implemented using only n-channel FETs. These ICs can implement, at low cost, high-efficiency drive circuits in applications that use motors that require high drive currents. T

文件：201.6 Kbytes 页数：19 Pages

SANYO

三洋