Automotive chip for single and dual H-bridge

Features • AEC-Q100 qualification ongoing • Full path RDSON less than 540 mΩ • Nominal continuous load current > 3 A • Operating battery supply voltage 4.5 V to 28 V • Operating VDD supply voltage 4.5 V to 5.5 V • All ECU internal pins can withstand up to 18 V • Output switching frequency u

文件：1.4203 Mbytes 页数：70 Pages

STMICROELECTRONICS

意法半导体

Automotive chip for single and dual H-bridge

L9969S/L9969U and L9969T are single and dual integrated H-bridges for resistive and inductive loads featuring output current direction and supervising functions.\n\n The PowerSSO24 houses one full H-bridge, while the PowerSSO36 houses both two H-bridges that can work in parallel, through independent • AEC-Q100 qualified \n• Full path RDS(on) less than 540 mΩ \n• Nominal continuous load current > 3 A \n• Operating battery supply voltage 4.5 V to 28 V \n• Operating VDD supply voltage 4.5 V to 5.5 V \n• All ECU internal pins can withstand up to 18 V \n• Output switching frequency up to 20 kHz \n• ;

ST

意法半导体

Automotive chip for single and dual H-bridge

Features • AEC-Q100 qualification ongoing • Full path RDSON less than 540 mΩ • Nominal continuous load current > 3 A • Operating battery supply voltage 4.5 V to 28 V • Operating VDD supply voltage 4.5 V to 5.5 V • All ECU internal pins can withstand up to 18 V • Output switching frequency u

文件：1.4203 Mbytes 页数：70 Pages

STMICROELECTRONICS

意法半导体

Automotive chip for single and dual H-bridge

Features • AEC-Q100 qualification ongoing • Full path RDSON less than 540 mΩ • Nominal continuous load current > 3 A • Operating battery supply voltage 4.5 V to 28 V • Operating VDD supply voltage 4.5 V to 5.5 V • All ECU internal pins can withstand up to 18 V • Output switching frequency u

文件：1.4203 Mbytes 页数：70 Pages

STMICROELECTRONICS

意法半导体

Dual, Low-Power, 1200Mbps ATE Driver/Comparator with 35mA Load

General Description The MAX9969 dual, low-power, high-speed, pin electronics driver/comparator with 35mA load IC includes, for each channel, a three-level pin driver, a dual comparator, variable clamps, and an active load. An additional differential comparator allows comparisons between the two c

文件：688.82 Kbytes 页数：31 Pages

Maxim

美信