HEX PRECISION LIMITER

DESCRIPTION The L9700 is a monolithic circuit which is suited for input protection and voltage clamping purpose. The limiting function is referred to ground and the positive supply voltage. One single element contains six independent channels. Very fast speed is achieved by internal feedback a

文件：97.42 Kbytes 页数：7 Pages

STMICROELECTRONICS

意法半导体

OCTAL GROUND CONTACT MONITORING CIRCUIT

DESCRIPTION The L9703isa bipolar monolithic integratedcir cuit for monitoring the status of up to eight contacts connected to GND. It contains eight contact senseinputs and eight microcomputer compatible three-state outputs. . OPERATING DC SUPPLY VOLTAGE RANGE 5V TO 25V . SUPPLY OVER

文件：169.21 Kbytes 页数：9 Pages

STMICROELECTRONICS

意法半导体

OCTAL GROUND CONTACT MONITORING CIRCUIT

DESCRIPTION The L9703isa bipolar monolithic integratedcir cuit for monitoring the status of up to eight contacts connected to GND. It contains eight contact senseinputs and eight microcomputer compatible three-state outputs. . OPERATING DC SUPPLY VOLTAGE RANGE 5V TO 25V . SUPPLY OVER

文件：169.21 Kbytes 页数：9 Pages

STMICROELECTRONICS

意法半导体

OCTAL SUPPLY CONTACT MONITORING CIRCUIT

DESCRIPTION The L9704 is a bipolar monolithic integrated circuit for monitoring the statusof up to eight contacts connected to the power supply (battery). It contains eight contact sense inputs and eight microcomputer compatible three-state outputs. ■ OPERATING DC SUPPLY VOLTAGE RANGE 5V TO 25V

文件：171.14 Kbytes 页数：8 Pages

STMICROELECTRONICS

意法半导体

OCTAL SUPPLY CONTACT MONITORING CIRCUIT

DESCRIPTION The L9704 is a bipolar monolithic integrated circuit for monitoring the statusof up to eight contacts connected to the power supply (battery). It contains eight contact sense inputs and eight microcomputer compatible three-state outputs. ■ OPERATING DC SUPPLY VOLTAGE RANGE 5V TO 25V

文件：171.14 Kbytes 页数：8 Pages

STMICROELECTRONICS

意法半导体

DOUBLE QUAD CONTACT INTERFACE CIRCUIT

DESCRIPTION The L9705 is a bipolar monolithic integrated circuit for monitoring the status of up to four contacts connected to GND and up to four contacts connected to the battery. The contact sense input supply the contact current and perform the contact resistance comparison function. At the o

文件：171.27 Kbytes 页数：8 Pages

STMICROELECTRONICS

意法半导体

Octal self configuring Low/High side driver

Description The L9733 IC is a highly flexible monolithic, medium current, output driver that incorporates 8 outputs that can be used as either internal low or high side drives in any combination. Outputs 1-8 are self-configuring as high or low side drives. Self-configuration allows a user

文件：559.11 Kbytes 页数：33 Pages

STMICROELECTRONICS

意法半导体

Automotive octal self configuring low/high side driver

Features  AEC-Q100 (Rev. F) qualified  Eight independently self configuring low/high drivers  Supply voltage from 4.5 V to 5.5 V  RON(max) = 0.7 Ω @ Tj = 25 °C, RON(max) = 1.2 Ω @Tj = 125 °C  Minimum current limit of each output 1 A  Output voltage clamping min. 40 V in low-side con

文件：571.77 Kbytes 页数：35 Pages

STMICROELECTRONICS

意法半导体

Automotive octal self configuring low/high side driver

Features  AEC-Q100 (Rev. F) qualified  Eight independently self configuring low/high drivers  Supply voltage from 4.5 V to 5.5 V  RON(max) = 0.7 Ω @ Tj = 25 °C, RON(max) = 1.2 Ω @Tj = 125 °C  Minimum current limit of each output 1 A  Output voltage clamping min. 40 V in low-side con

文件：571.77 Kbytes 页数：35 Pages

STMICROELECTRONICS

意法半导体

Automotive octal self configuring low/high side driver

Features  AEC-Q100 (Rev. F) qualified  Eight independently self configuring low/high drivers  Supply voltage from 4.5 V to 5.5 V  RON(max) = 0.7 Ω @ Tj = 25 °C, RON(max) = 1.2 Ω @Tj = 125 °C  Minimum current limit of each output 1 A  Output voltage clamping min. 40 V in low-side con

文件：571.77 Kbytes 页数：35 Pages

STMICROELECTRONICS

意法半导体