Description

L6668 is a current-mode primary controller IC, designed to build single-ended converters.

The IC drives the system at fixed frequency at heavy load and an improved Standby function causes a smooth frequency reduction as the load is progressively reduced. At very light load the device enters a special operating mode (burst-mode with fixed, externally programmed peak current) that, in addition to the on-board high-voltage start-up and the very low quiescent current, helps keep low the consumption from the mains and be compliant with energy saving regulations. To allow meeting compliance with these standards in power-factor-corrected systems too, an interface with the PFC controller is provided that enables to turn off the pre-regulator when the load level falls below a threshold.

General Features

■ MULTIPOWER BCD TECHNOLOGY

■ LOAD-DEPENDENT CURRENT-MODE CONTROL: FIXED-FREQUENCY (HEAVY LOAD), FREQUENCY FOLDBACK (LIGHT LOAD), BURST-MODE (NO-LOAD)

■ ON-BOARD HIGH-VOLTAGE START-UP

■ IMPROVED STANDBY FUNCTION

■ LOW QUIESCENT CURRENT (< 2 mA)

■ SLOPE COMPENSATION

■ PULSE-BY-PULSE & HICCUP-MODE OCP

■ INTERFACE WITH PFC CONTROLLER

■ DISABLE FUNCTION (ON/OFF CONTROL)

■ LATCHED DISABLE FOR OVP/OTP FUNCTION

■ PROGRAMMABLE SOFT-START

■ 2 PRECISION REFERENCE VOLTAGE EXTERNALLY AVAILABLE

■ ±800 mA TOTEM POLE GATE DRIVER WITH INTERNAL CLAMP AND UVLO PULL-DOWN

■ BLUE ANGEL, ENERGY STAR, EU CODE OF CONDUCT COMPLIANT

■ SO16 PACKAGE ECOPACK®

APPLICATIONS

■ HI-END AC-DC ADAPTERS/CHARGERS FOR NOTEBOOKS.

■ LCD/CRT MONITORS, LCD/CRT TV

■ DIGITAL CONSUMER

L6668TR属于集成电路（IC） > AC DC 转换器，离线开关。意法半导体（ST）集团制造生产的L6668TRAC DC 转换器，离线开关该系列是元器件级控制产品，用于构建将交流市电转换为直流电（通常电压大幅降低）的设备。集成和未集成系统主要开关元件的器件均包括在内。由于高输入输出电压比，以及此类系统中通常需要隔离，这些器件通常与外部变压器配合使用。尽管通常使用定制变压器来实现此用途，但也有许多专门用于此用途的库存产品，请参见“开关转换器，SMPS 变压器”标题。