L6564数据手册集成电路（IC）的PFC（功率因数校正）规格书PDF

描述 Description

The L6564 device is a current mode PFC controller operating in transition mode (TM) and represents the compact version of the L6563S device as it embeds the same driver, reference and control stages in a very compact 10-pin SSOP10 package.

The highly linear multiplier, along with a special correction circuit that reduces crossover distortion of the mains current, allows wide range mains operation with an extremely low THD even over a large load range.

The output voltage is controlled by means of a voltage mode error amplifier and an accurate (1% at TJ= 25 °C) internal voltage reference. The loop stability is optimized by the voltage feed-forward function (1/V2correction), which in this IC uses a proprietary technique that considerably improves line transient response as well in case of mains both drops and surges (“bidirectional”).

In addition to overvoltage protection able to control the output voltage during transient conditions, the IC also provides protection against feedback loop failures or erroneous settings. Other on-board protection functions allow brownout conditions and boost inductor saturation to be safely handled.

The totem-pole output stage, capable of 600 mA source and 800 mA sink current, is suitable for the high power MOSFET or IGBT drive. This, combined with the other features and the possibility to operate with ST's proprietary fixed-off-time control, makes the device an excellent solution for SMPS up to 400 W that require compliance with the EN61000-3-2 and JEITA-MITI standards.

特性 Features

• Fast “bidirectional” input voltage feed-forward (1/V2correction)
• Accurate adjustable output overvoltage protection
• Protection against feedback loop disconnection (latched shutdown)
• Inductor saturation protection
• AC brownout detection
• Low (≤100 μA) start-up current
• 6 mA max. operating bias current
• 1% (at TJ= 25 °C) internal reference voltage
• -600/+800 mA totem pole gate driver with active pull-down during UVLO
• SSOP10 package

简介

L6564属于集成电路（IC）的PFC（功率因数校正）。由制造生产的L6564PFC（功率因数校正）功率因数校正 (PFC) 是用于调整交流电路中的电压和电流之间的相位角，使之趋近于零的半导体器件。不同模式包括平均电流、边界导通、连续导通、临界导通、电流控制式频率折返、不连续和不连续导通，开关频率从 6 kHz 至 1.7 MHz 可调。