L5300GJ中文资料标准功能，稳压器数据手册ST规格书

描述 Description

L5300GJ is a low dropout linear regulator with microprocessor control functions such as power on reset, low voltage reset, early warning, ON/OFF control. Typical quiescent current is 55 μA in very low output current mode and enabled regulator. It drops to 5 μA with not enabled regulator.

On-chip trimming results in high output voltage accuracy (2%). Accuracy is kept over wide temperature range, line and load variation. Early warning circuit monitors the input voltage and compares it with an internal voltage reference.

The maximum input voltage is 40 V. The maximum output current is internally limited.

Internal temperature protection disables the voltage regulator output. In addition, only low value ceramic capacitor on output is required for stability (equal or above 220 nF).

特性 Features

• AEC-Q100 qualified
• Operating DC supply voltage range5.6 V to 40 V
• Low dropout voltage
• 300 mA current capability
• Low quiescent current
• Very low consumption mode
• Precision output voltage 5 V +/- 2%
• Reset circuit sensing the output voltage
• Programmable reset pulse delay with external capacitor
• Early warning
• Very wide stability range with low value output capacitor
• Thermal shutdown and short circuit protection
• Wide temperature range (Tj= -40 °C to 150 °C)
• Enable input for enabling / disabling the voltage regulator

简介

L5300GJ属于集成电路（IC）的线性+开关稳压器。由制造生产的L5300GJ稳压器 - 线性线性稳压器用于提供稳定的输出电压，无论负载电流、输入电压或环境因素如何变化，这些输出电压通常都要保持不变。它们的工作原理要求输入电压维持在高于所需的输出电压，而且要超出某个最小量，并且在工作时会将输入端的任何多余电压转换为热量。对于大多数应用而言，虽然这种稳压器的效率低于开关模式的稳压器，但它们通常更适合对噪声高度敏感的应用。