Features

• Overvoltage Protection

 24VDC Tolerance on CC1/2, SBU1/2

 CC1/2 OVP = 5.8V

 SBU1/2 OVP = 4.8V

 Ultra-Fast 15ns Response Time

• IEC61000-4-5 Surge Protection

 ±40V Surge Tolerance on CC1/2

 ±30V Surge Tolerance on SBU1/2

• IEC61000-4-2 ESD Protection

 ±15kV air gap on CC1/2, SBU1/2

 ±8kV contact on CC1/2, SBU1/2

 ±2kV HBM on all pins (JEDEC JS-001-2017)

• CC Switches:

 1.25A, 270mΩ, 40pF, 140MHz

 Automatic 5.1kΩ dead battery pull-down

• SBU Switches:

 3Ω, 11pF, 800MHz

• 2.5V to 5.5V Operating Supply Voltage Range

• -40°C to 85°C Operating Temperature Range

• 16-bump WLCSP 1.7mm x 1.7mm (0.4mm pitch)

• 20 pin TQFN 3mm x 3mm (0.4mm pitch)

• RoHS and Green Compliant

Brief Description

The KTU1121 provides four conducting paths with

overvoltage protection (OVP) for USB Type-C CC and

SBU signals. Once an overvoltage event is detected, it

will shut down all paths to protect circuits in system side,

like PD controller from damage.

All the SBU and CC switches have very low oncapacitance

for broad bandwidth to allow high-speed

signal passing through without loss. The CC1/2 switches

have low on-resistance for passing VCONN power up to

1.25A.

During dead battery conditions, internal 5.1kΩ resistors

automatically pull-down on CC1/2 to ensure that the upstream

source provides 5V on VBUS.

The KTU1121 is packaged in RoHS and Green

compliant 16-bump WLCSP 1.7mm x 1.7mm package

or 20 pin 3mm x 3mm TQFN package.

Applications

• Notebook PCs, Netbooks, Tablets, Monitors, TVs

• Gaming Devices, Set-Top Boxes, Networking