KSZ8999中文资料9-Port 10/100 Unmanaged Ethernet Switch with Fiber Support数据手册Microchip规格书

描述 Description

The KS8999 contains eight 10/100 physical layer transceivers, nine MAC (Media Access Control) units with an integrated layer 2 switch.



The device runs in two modes. The first mode is an eight port integrated switch and the second is as a nine port switch with the ninth port available through an MII (Media Independent Interface).



Useful configurations include a stand alone eight port switch as well as a eight port switch with a routing element connected to the extra MII port. The additional port is also useful for a public network interfacing. The KS8999 is designed to reside in an unmanaged design not requiring processor intervention. This is achieved through I/O strapping or EEPROM programming at system reset time.



On the media side, the KS8999 supports 10BaseT, 100BaseTX and 100BaseFX as specified by the IEEE 802.3 committee. Physical signal transmission and reception are enhanced through use of analog circuitry that makes the design more efficient and allows for lower power consumption and smaller chip die size.



Microchip's complimentary and confidential LANCheck® online design review service is available for customers who have selected our products for their application design-in. The LANCheck online design review service is subject to Microchip's Program Terms and Conditions and requires a myMicrochip account.

特性 Features

• 9 port (8+1) 10/100 integrated switch with eight physical layer transceivers and one MII/SNI interface
• 128K Byte of SRAM on chip for frame buffering
• Wire speed reception and transmission
• Automatic address learning, address aging and address migration
• Supports 802.1p priority and port based priority
• Supports 1536 byte frame for VLAN tag
• Proven transceiver technology for UTP and fiber operation
• Supports for UTP or fiber on all 8-ports
• Hardware based 10/100, full/half, flow control and auto-negotiation
• Full-duplex IEEE 802.3x flow control
• Supports MDI/MDI-X auto crossover
• Unmanaged operation via strapping or EEPROM at system reset time (see Reset Reference Circuit section)
• Single 2.0V power supply with options for 2.5V and 3.3V I/O
• Supports both commercial and industrial temperature
• Industrial temperature range: –40°C to +85°C (KS8999I)
• Commercial temperature range: 0°C to +70°C (KSZ8999)
• Industrial temperature range: –40°C to +85°C (KSZ8999I)

简介

KSZ8999属于集成电路（IC）的专用IC。由制造生产的KSZ8999专用 IC专用专用集成电路 (IC) 或芯片设计用于执行特定功能。这个类别包括可寻址开关、空芯仪表驱动器、音视频开关、验证芯片、自动放电、时钟发生器、彩色扫描仪，以及各种应用所用的其他许多集成电路。