KSZ8841集成电路（IC）的控制器规格书PDF中文资料

描述 Description

The KSZ8841P is a single chip Fast Ethernet MAC controller with a 32 bit/33MHz PCI processor interface. The KSZ8841P is fully compliant with the IEEE 802.3u standard. It will also be available in an Industrial Temperature part, the KSZ8841-PMQLI from Q1 2006.

特性 Features

• Supports 10/100BASE-T/TX/FX

• Supports IEEE 802.3x full-duplex flow control and half-duplex backpressure collision flow control

• Fully compliant to the IEEE 802.3u standard

• Supports burst data transfers

• 8KB internal memory for RX/TX FIFO buffers

• Early TX/RX functions to minimize latency through the device

• Single 25MHz reference clock for both PHY + MAC

Benefits

• Single chip Ethernet controller with IEEE 802.3u support

• 32 bit/33MHz PCI bus for different host processor interfaces

• Early TX/RX mode support, to allow for “cut thru” in Potency Critical Industrial Ethernet or Embedded Ethernet Application

• Dynamic buffer memory scheme – Essential for applications such as Video over IP where image jitter is unacceptable

• Micrel LinkMDTM cable diagnostic capabilities to determine cable length and distance to fault, and to diagnose faulty cables

• Wake-on-LAN technology

• HP Auto MDIX crossover with disable and enable option

• Enhanced power management feature with powerdown feature

• Industrial Temperature support: –40oC to +85oC

Applications

• Consumer Applications: – Set-Top Box • Fax • TV • Digital TV

• Video over IP

• Industrial Control Sensor Devices: – Temperature • Pressure • Level • Valves

• Security and Surveillance Devices