Compact high speed thick film thermal printhead (12 dots / mm)

Using its expertise in LSI technology, ROHM has developed new high density driver chips for use in the KF3004-GD31A . Capable of being employed for both thermal and thermal transfer printing, with a print speed of 200mm/s, the resulting print heads are the fastest in their class. The high-speed an

文件：89.54 Kbytes 页数：5 Pages

ROHM

罗姆

Compact low voltage thick film thermal printhead (12dots / mm)

KF3004-GF11A of low voltage thermal printheads have a 1.25-mm pitch connectors and reduced power supply circuit voltage requirements. This makes them useful for a wide range of applications, including CAT, FET-POS and naturally, handheld devices that demand printer heads which can operate with low

文件：75.56 Kbytes 页数：5 Pages

ROHM

罗姆

Thick Film Thermal Printhead (300DPI)

KF3004-GL50A is developing type of GL40 series which are developed mainly for label printers. We have adopted low coefficient of abrasion and conductive protection coat to GL40 series which are possible for high speed and good printing quality. That is KF3004-GL50A which is 24V standard thick f

文件：77.19 Kbytes 页数：4 Pages

ROHM

罗姆

Thick film thermal printhead (with thermal historical control)

GM50 series is the new product that newly added the future history control and driver LSI which has the function of thermal historical control, to GL50 series which is employing the conventional thick-film fast response thermal element. Features 1) Newly developed thick-film fast response

文件：83.08 Kbytes 页数：4 Pages

ROHM

罗姆

Compact low voltage thick film thermal printhead (12dots / mm)

KF3004-GF11A of low voltage thermal printheads have a 1.25-mm pitch connectors and reduced power supply circuit voltage requirements. This makes them useful for a wide range of applications, including CAT, FET-POS and naturally, handheld devices that demand printer heads which can operate with low s 1) Both the circuit voltage and the voltage required during printing are 3.3V ; this allows the design of complete printer assemblies with energy-saving low power consumption.\n2) KF3004-GF11A has a resistance value of 210Ω and can take a maximum current of 8.5V for printing. This is useful in appli;

ROHM

罗姆

Thick Film Thermal Printhead (300DPI)

KF3004-GL50A is developing type of GL40 series which are developed mainly for label printers. We have adopted low coefficient of abrasion and conductive protection coat to GL40 series which are possible for high\nspeed and good printing quality. That is KF3004-GL50A which is 24V standard thick film 1) Perform 150km life time adopting new protective coat. (Perform three times life time by coefficient of abrasion which is about is about 1/10 of current mass-producing coat.)\n2) Build in thermal high speeded heater and perform high printing 6 IPS. (150mm / s)\n3) Available for thermal transfer pr;

ROHM

罗姆

Thick film thermal printhead (with thermal historical control)

GM50 series is the new product that newly added the future history control and driver LSI which has the function of thermal historical control, to GL50 series which is employing the conventional thick-film fast response thermal element. 1) Newly developed thick-film fast response thermal element and driver LSI with the function of thermal history control\nwhich is added the future history control are employed for this series. It is possible to print with super high speed of 10 inches / s or 250 mm / s.\n2) 150km life realized by at;

ROHM

罗姆