KBC1122P-AJZS数据手册集成电路（IC）的专用规格书PDF

描述 Description

General Description
The KBC1122 is an integrated Keyboard/System Management Controller which incorporates a high
performance 8051 Micro-Controller, an LPC Bus Interface which provides a Firmware Hub Interface
and integrated Super I/O/LPC Resources. The KBC1122 is powered by two separate supply planes
(VCC1, VCC0) to provide “instanton” and sophisticated system power management functions. The
KBC1122 power control circuitry supports multiple low power-down modes.
The KBC1122 incorporates a Direct Battery Management (DBM) with SMSC SentinelAlert! accessible by the 8051. Together with external remote temperature sensor(s) can provide complete Analog Monitoring & Control System. The KBC1122 DBM includes an 8 channel ADC, a 3 channel DAC with SMSC SentinelAlert! and up to 2 SMSC SentinelAlert! GPIO's, two channel one-pin Temperature Sensor Communication Links, and a hardware protect output that requires no programming or 8051 intervention to operate.
The KBC1122 incorporates a Standby Power Reset Generator (RESGEN) which monitors the VCC1
power input and generates the internal VCC1 power on reset for the KBC1122. The KBC1122 also
outputs VCC1RST# which can be used to reset the Flash memory on the Shared Flash Interface (SFI).PRODUCT FEATURES
3.3V Operation with 5V Tolerant Buffers
ACPI 1.0b/2.0 and PC99a/PC2001 Compliant
LPC Interface with Clock Run Support
— Serial IRQ Interface Compatible with Serialized IRQ Support for PCI Systems
— 15 Direct IRQs
— Three 8-Bit DMA Channels
— ACPI SCI Interface
—nSMI
— Shadowed write only registers
LPC/Firmware Hub Host Flash Interface
— Single Byte FWH Memory Read and FWH Memory Write Support
— FWH ID Support
— 16MB FWH Flash and Register Addressing, 128K Legacy BIOS Addressing
— Single Byte LPC Memory Read and LPC Memory Write Support
Serial Peripheral Interface (SPI)
— 3-pin Full Duplex serial communication interface.
— Dual Ported Controller with Keeper Circuit 8 MByte Shared FlashROM Interface (SFI)
— 8051/Host CPU HardwareArbitrated Interface
— 0.5 - 8MB - Host System BIOS & 8051 Keyboard
— 8051 64KB Code Space Accessible as Separate 32KB Pages in Flash
— Low-Power Flash Access Modes
— 8051-Programmable Flash Access Protection
– Read/Write/No-Access Protection
– Variable Bank Sizes
Host Flash Address Redirection for Recovery
Serial Flash Programming Interface
Two Power Planes
— Low Standby Current in Sleep Mode
— Intelligent Auto Power Management for Super I/O
— Main powered blocks power supplied by standby
power plane and controlled by power
management signals
3-Port ACPI Embedded Controller Interface
Configuration Register Set
— Compatible with ISA Plug-and-Play Standard(Version 1.0a)
— Four Pin Selectable Addressing Options
— 8051-Programmable Base Address

特性 Features

3.3V Operation with 5V Tolerant Buffers
ACPI 1.0b/2.0 and PC99a/PC2001 Compliant
LPC Interface with Clock Run Support
— Serial IRQ Interface Compatible with Serialized IRQ Support for PCI Systems
— 15 Direct IRQs
— Three 8-Bit DMA Channels
— ACPI SCI Interface
—nSMI
— Shadowed write only registers
LPC/Firmware Hub Host Flash Interface
— Single Byte FWH Memory Read and FWH Memory Write Support
— FWH ID Support
— 16MB FWH Flash and Register Addressing, 128K Legacy BIOS Addressing
— Single Byte LPC Memory Read and LPC Memory Write Support
Serial Peripheral Interface (SPI)
— 3-pin Full Duplex serial communication interface.
— Dual Ported Controller with Keeper Circuit 8 MByte Shared FlashROM Interface (SFI)
— 8051/Host CPU HardwareArbitrated Interface
— 0.5 - 8MB - Host System BIOS & 8051 Keyboard
— 8051 64KB Code Space Accessible as Separate 32KB Pages in Flash
— Low-Power Flash Access Modes
— 8051-Programmable Flash Access Protection
– Read/Write/No-Access Protection
– Variable Bank Sizes
Host Flash Address Redirection for Recovery
Serial Flash Programming Interface
Two Power Planes
— Low Standby Current in Sleep Mode
— Intelligent Auto Power Management for Super I/O
— Main powered blocks power supplied by standby
power plane and controlled by power
management signals
3-Port ACPI Embedded Controller Interface
Configuration Register Set
— Compatible with ISA Plug-and-Play Standard(Version 1.0a)
— Four Pin Selectable Addressing Options
— 8051-Programmable Base Address

简介

KBC1122P-AJZS属于集成电路（IC）的专用。由制造生产的KBC1122P-AJZS专用该系列产品可提供所需的功能，用以将信息源/信宿连到各种复杂或范围狭窄应用中的传感器、变送器、致动器、传输介质或其他此类端点。例如，汽车安全气囊驱动器、车身控制和信息娱乐总线、自适应电缆均衡器、智能卡等等。