200A POWER LATCHING RELAY

Application Notes 1. It is possible that during transit or final assembly the relay could change state. Therefore, it is recommended that all relays be set to the desired state via a power supply. 2. In order to maintain an “Open” or “Closed” state of the relay, the coil voltage should reach the

文件：5.52857 Mbytes 页数：5 Pages

KG

200A POWER LATCHING RELAY

Application Notes 1. It is possible that during transit or final assembly the relay could change state. Therefore, it is recommended that all relays be set to the desired state via a power supply. 2. In order to maintain an “Open” or “Closed” state of the relay, the coil voltage should reach the

文件：5.52857 Mbytes 页数：5 Pages

KG

200A POWER LATCHING RELAY

Application Notes 1. It is possible that during transit or final assembly the relay could change state. Therefore, it is recommended that all relays be set to the desired state via a power supply. 2. In order to maintain an “Open” or “Closed” state of the relay, the coil voltage should reach the

文件：5.52857 Mbytes 页数：5 Pages

KG

200A POWER LATCHING RELAY

Application Notes 1. It is possible that during transit or final assembly the relay could change state. Therefore, it is recommended that all relays be set to the desired state via a power supply. 2. In order to maintain an “Open” or “Closed” state of the relay, the coil voltage should reach the

文件：5.52857 Mbytes 页数：5 Pages

KG

200A POWER LATCHING RELAY

Application Notes 1. It is possible that during transit or final assembly the relay could change state. Therefore, it is recommended that all relays be set to the desired state via a power supply. 2. In order to maintain an “Open” or “Closed” state of the relay, the coil voltage should reach the

文件：5.52857 Mbytes 页数：5 Pages

KG

200A POWER LATCHING RELAY

Application Notes 1. It is possible that during transit or final assembly the relay could change state. Therefore, it is recommended that all relays be set to the desired state via a power supply. 2. In order to maintain an “Open” or “Closed” state of the relay, the coil voltage should reach the

文件：5.52857 Mbytes 页数：5 Pages

KG

200A POWER LATCHING RELAY

Application Notes 1. It is possible that during transit or final assembly the relay could change state. Therefore, it is recommended that all relays be set to the desired state via a power supply. 2. In order to maintain an “Open” or “Closed” state of the relay, the coil voltage should reach the

文件：5.52857 Mbytes 页数：5 Pages

KG

200A POWER LATCHING RELAY

Application Notes 1. It is possible that during transit or final assembly the relay could change state. Therefore, it is recommended that all relays be set to the desired state via a power supply. 2. In order to maintain an “Open” or “Closed” state of the relay, the coil voltage should reach the

文件：5.52857 Mbytes 页数：5 Pages

KG

200A POWER LATCHING RELAY

Application Notes 1. It is possible that during transit or final assembly the relay could change state. Therefore, it is recommended that all relays be set to the desired state via a power supply. 2. In order to maintain an “Open” or “Closed” state of the relay, the coil voltage should reach the

文件：5.52857 Mbytes 页数：5 Pages

KG

200A POWER LATCHING RELAY

Application Notes 1. It is possible that during transit or final assembly the relay could change state. Therefore, it is recommended that all relays be set to the desired state via a power supply. 2. In order to maintain an “Open” or “Closed” state of the relay, the coil voltage should reach the

文件：5.52857 Mbytes 页数：5 Pages

KG